Arlo Pro 2, HomeKit setup issues

[JamesC]

Hype17, TTeuer, JeremyA, Peterlyd

I've sent a token reset request to your base station that should resolve the issue. Please reboot your base station (remove and reapply power) allow the base station to come back online and try setting up HomeKit again using these instructions: How do I connect my Arlo camera to Apple HomeKit?

JamesC

[Peterlyd]

Unfortunately it did not work.

[TTeuer]

Hi James,

Thank you very much. That did the trick. I was able to add it back into HomeKit without issue after that.

[Bartley]

James I am having the same issue. Can you send me a token too. Thanks Gary

[JamesC]

Bartley,

I've sent a token reset request to your base station that should resolve the issue. Please reboot your base station (remove and reapply power) allow the base station to come back online and try setting up HomeKit again using these instructions: How do I connect my Arlo camera to Apple HomeKit?

JamesC

[Bartley]

James, Worked like a charm. Thanks

[RIck207]

Hi James, 

Could you also send a token to my base station please?

I had Arlo in my HomeKit until a recent software/firmware upgrade.

Thanks

[JamesC]

RIck207,

I've sent a token reset request to your base station that should resolve the issue. Please reboot your base station (remove and reapply power) allow the base station to come back online and try setting up HomeKit again using these instructions: How do I connect my Arlo camera to Apple HomeKit?

JamesC

[YellowRabbit]

Hi James,

I also have a similar issue. I had all my cameras connected fine. But I just recently went to view them and they had stopped working (they would simply show "No Response" when I tried to view them). I removed Arlo from HomeKit and tried to re-add it, but now I can't discover the devices. It gets stuck on the "discovering your device, please wait" screen.

Note that I have done all the usual stuff such as reboot my phone, the base station (pulling the power cord), the router etc etc.

Can you please help?

Cheers,

Jason

Model: VMB4000r3

Firmware: 1.16.1.1_3348_facf74c

[Isobaric]

Hi james how do I get the new token as I having the same issue?

[RIck207]

Hi James, thanks for your support sending the token did the trick. Arlo now on HomeKit.
I see all my cameras but Arlo audio doorbell and chime are not visible on homekit. Is this normal?
I was hoping to set some scenes using the door bell and chime.

[FrederikNissen]

James, will you send me a tonen reset as well?
Thanks

[JamesC]

YellowRabbit, Isobaric, FrederikNissen

I've sent a token reset request to your base station that should resolve the issue. Please reboot your base station (remove and reapply power) allow the base station to come back online and try setting up HomeKit again using these instructions: How do I connect my Arlo camera to Apple HomeKit?

JamesC

[Isobaric]

Thank you, that fixed it...!

[YellowRabbit]

Hi James,

Thanks very much, I can confirm that this has fixed the issue.

Cheers,

J

[Joeyski28]

I’m also having the same HomeKit issue. Could you send a token to my unit too? Thanks!

[JamesC]

Joeyski28,

I've sent a token reset request to your base station that should resolve the issue. Please reboot your base station (remove and reapply power) allow the base station to come back online and try setting up HomeKit again using these instructions: How do I connect my Arlo camera to Apple HomeKit?

JamesC

[Joeyski28]

Works now- thanks!

[Ltuned]

Hi James,

Could I please get a token reset? I’ve tried to setup HomeKit and it stuck on “Discovering your device. Please wait.” I have tried to reset the base station and phone but nothing works. 

Thanks,

Kev

[Jp4512]

My Arlo Pro was working great for six months or better with HomeKit and then stop working about a month ago. I have tried everything to get it connected back with no luck. Can I get a token rest to see if that will fix my HomeKit connection issue?

[foxilla]

Hello, JamesC.  I would greatly appreciate a token reset as well, as I am having the same issues as many others with VMB4000r3.  Thanks for your help.

[JamesC]

Ltuned, Jp4512, foxilla

I've sent a token reset request to your base station that should resolve the issue. Please reboot your base station (remove and reapply power) allow the base station to come back online and try setting up HomeKit again using these instructions: How do I connect my Arlo camera to Apple HomeKit?

JamesC

[Ltuned]

Hi James,

Thanks for sending the token. I have reboot your base station (remove and reapply power) and restart the Arlo app as well but still stuck on Discovering your device. Please wait page. They are on the same WiFi network as  Arlo SmartHub or base station. I have 3 Arlo Pro camera, Apple Home app, Arlo app, Arlo Base Station (VMB4000r3) with station firmware version: 1.16.1.1_3348. Please help!!!

Thanks,

Kev

[foxilla]

Thank you, James.  I was able to successfully add my Arlo devices to Homekit after you reset token.

[JamesC]

Ltuned,

Please contact the Arlo Support Team to further investigate this issue. You will find several options for contacting support in the provided link.

JamesC