I just wish tech reviewers would be able to spend enough time with the hardware, software and support to realize what a dog and pony show Arlo/Netgear really is.
Arlo hardware universally gets named as the best home cameras in article after article, but these reviewers don't have the hardware long enough to test out all the features to really be able to make that judgement, unfortunately.
The reality is I’m not having problems and if you want to come see my setup let’s trade information and you can. As I’ve said, my geofencing is working exactly how I have it setup.
In regards to customer service, I haven’t had that many dealings with them. I called once over the phone and the guy fixed the issue I had. Mostly I really just want better communication about HomeKit support, and actual HomeKit support. That’s really my only gripe.
We might be half way there with geofencing drama - one week and a couple of software updates later. Half-way because it (geofencing) works fine when leaving the house - the camera gets automatically armed. However returning back home does not disarm the camera. If I go to the app and switch geo fencing off and back on - it properly detected me being home and disarms the camera.
Common, Arlo, almost there!
I naively believe Arlo wants this nighmare to go away as much as we do. Hopefully they will hire qualified developers (they are not cheap) and invest more into QA...
Either by fixing an issue or issues and updating the Arlo software app at some point in time they caused another bug to show up (in our case the geo-fencing Home Mode not working) or IOS changed something in their recent updates, could be Location Services or some other security change, which resulted in the the geo-fencing issues. Regardless, we're screwed until a fix is available but it has to come from the Arlo team.
My Arlos have not had a firmware upgrade for quite a while and everything was working fine up until not too long ago, somewhere in May. Everything started for me somewhere between the latest IOS or Arlo app updates. My guess is the former.
A fix was released for the Geofencing feature late last week. Try using Geofencing again to see if it is behaving as expected.
You can find more information on this here: https://status.arlo.com/
I updated to 2.7.10 4 days ago, testet it and found it was still not working. On the status page you tell US to look at, your development team types that geofence issue has been solbes 2 days ago, but there is no new app available in app store, and firmware in all my 4 basestations is still the same as of 24. Of May. = problem still persist.
The fix i'm referring to was not a firmware update or an app release, this was a server side fix. I recommend re-enabling geofencing and testing again to see if you still experience an issue.
Not working for me still. I'm out of zone and my wife just left the zone, so the system should have armed, but it did not. It's still showing my wife as being in the zone.
I changed mode to Disarm and then back to Geofencing, but no luck.
My Iphone had an update to 12.3.1 which I installed this WK and the geofencing is working again both ways. I don't know if it's related but up until last week the geofencing 'Home Mode' was not working but since a few days it's back to normal.
As of 6/3/19 @ 7:00pm EST Geofencing is still not working. My wife and I have two iPhones both updated to iOS 12.3.1 and the Arlo App 2.7.10.
I even went as far as singing out and the deleting the Arlo App, and resetting location services on both iPhones and powering devices off and back on. Prior to the Arlo App deletion I removed my wife from the Arlo Authorized users list or removed her Admin rights. After that I re-downloaded the Arlo App (2.7.10) on both of our iPhones. What is strange is that when I added the Arlo back to my wife’s iPhone, it didn’t ask for permission for location services until I shared the Arlo Account devices with her (Gave her Admin privileges), only then did the Arlo App ask for location privileges on her device. I have the Arlo System “Arming/Schedule” when leaving and Disarming for when either is “Home.” We both left our house, and I noticed again, no notification for “Armed” when we were away. So I checked the Arlo App and it stated I was “Out of Zone” while my wife’s iPhone said “In-Zone” still, and by this time we were well away from our Home. So I tried the trick that many have been using, setting to “Disarmed” then back to “Geofencing/Schedule” manual while we were away. This did work, but again it wasn’t a automatic switch like it should be, like it has been before.
When we arrived back Home, to my surprise, both iPhones showed “In-Zone” but the Arlo System did not switch to “Disarmed” like it should. So I did preform another manual “Disarm” then “Geofencing/Schedule” switch, and the system then did change to “Home” and disarm, but again still no automatic switch.
So the server side fixes for geofencing Arlo has put in place a few days back, and the App and Firmware updates for “bug fixes” hasn’t resolved anything. I have Several Arlo Ultras, all up to date running the latest Base Station Firmware and Camera Firmware, still issues persist.
Will you PLEASE address this issue..this is getting very very frustrating, and we are ALL growing tired of waiting.
This is definitely not fixed for me, in fact it's worse than what it was the past week or week and a half
Now, even disarming and then putting it back on geofencing doesn't "fix" the problem like it used to
Some people have reported that this causes problems.
Works fine here.
Just another user
Arlo hardware: Q Plus, Pro 2 (X2), Pro 3 (X3), Pro 3 Floodlight, Security Light (X2), Ultra (X2), Doorbell, Chime
Geofencing should work with any mode, scheduled or not
I was surprised when the Arlo person here said this was a server side fix yesterday. I thought to myself there's no way this could only be an issue on the server side. There most likely needs to either be an app update and/or firmware update to the basestation to fix this