Arlo|Smart Home Security|Wireless HD Security Cameras
× Arlo End of Life Policy Notice
To view Arlo’s new End of Life Policy, click here.

Reply
Discussion stats
  • 5 Replies
  • 3821 Views
  • 5 Likes
  • 4 In Conversation
HP_4
Initiate
Initiate

Sync button on model: VMS3430 not operable.  No light displayed after pressing sync button for 2 seconds.  Thank you!

1 ACCEPTED SOLUTION

Accepted Solutions
TomMac
Guru Guru
Guru

That may be holding the button to long... ( it puts the base into a different mode )

 

Try and just do a quick press on the base's sync button and then push the camera's button

--------------------------------------
Morse is faster than texting!
--------------------------------------

View solution in original post

5 REPLIES 5
TomMac
Guru Guru
Guru

That may be holding the button to long... ( it puts the base into a different mode )

 

Try and just do a quick press on the base's sync button and then push the camera's button

--------------------------------------
Morse is faster than texting!
--------------------------------------
HP_4
Initiate
Initiate

TomMac,

 

Thank you for your response.  I'm up and running. 

Rbaitfish
Aspirant
Aspirant
This didn't solve my install issue, still no lights on router and goes to Amber on camera in 5 seconds...
jguerdat
Guru Guru
Guru

No lights at all on the base?  That's a problem of either bad power supply or base.  Return the system to the store and swap for a new one.

TomMac
Guru Guru
Guru

Rbaitfish wrote:
This didn't solve my install issue, still no lights on router and goes to Amber on camera in 5 seconds...

As mentioned, if no lights at all, there's more than syncing problems.

 

The LEDS from left are, POWER - INTERNET - CAMERAS.

 

If the first two aren't Green, you'l never be able to get the system working. After the first two, then syncing a camera turns the third LED green.

 

So.... what color are the LEDS on your base?

--------------------------------------
Morse is faster than texting!
--------------------------------------