Scheduling individual devices

[HDMItime]

The new Arlo app in 2024 does not allow the user to schedule individual devices.

I have a camera in my utility room that I only want to be active to record motion and video between the hours 11 pm and 6 am.

I am unable to schedule this specific camera like I was able to in the old app.

Please advise how I can schedule the timings for motion and recording for an individual camera.

The new app seems to be censored around changing modes rather than Scheduling timings, please help thanks

[StephenB]

---

@HDMItime wrote:

I am unable to schedule this specific camera like I was able to in the old app.

---

FWIW, you were only able to do that with "Library" because you weren't using a base station.

---

@HDMItime wrote:

I have a camera in my utility room that I only want to be active to record motion and video between the hours 11 pm and 6 am.

Please advise how I can schedule the timings for motion and recording for an individual camera.

---

First,

1. Set up Arm Away so that it arms all your cameras. 
2. Set up Arm Home so that it arms all the cameras except the one in the utility room.

If you aren't sure how to do that, then read through this article:

• https://kb.arlo.com/000062777/About-Arlo-Routines-Modes-Rules-and-Automations

Note if there is no rule for the camera in a mode, then that camera is disarmed when the mode is in use.

After you've tested these changes, then set up two schedule automations.  One switches to Arm Away at 6 am, the other switches to Arm Home at 11 pm.