Vmc3030

[lildaddy75249]

Can u adjust the brightness on the vmc3030

[TomMac]

there is some iris control on the camera from the Live view screen... Start a live view and the icon that looks like a "sun" will give you a +/- iris setting.

[lildaddy75249]

I slide the iris no change in brightness for the vmc3030

[TomMac]

It does respond but not super quick...maybe try another device to do it... it is only a +/- 1 or 2 setting btw

[lildaddy75249]

https://arlo.netgear.com/hmsweb/users/library/share/link/ACC278484AB10008_201612

This is the brightest it gets

[TomMac]

---

lildaddy75249 wrote:
https://arlo.netgear.com/hmsweb/users/library/share/link/ACC278484AB10008_201612

This is the brightest it gets

---

It seems like not the iris but the IR illuminators are not functioning... turn on a light in gargage and the picture should be better, showing the cameras ok.

Pull batteries and replace... armed the camera and go into a dark room/closet...looking at the front of cameras you should see the IR leds glowing slightly red ( 6 or so )

If not, make sure the IR is turned on in settings. The IRs should light up a garage well as alot bounches off the walls too.

Here's the Arlo IR's on outside...the small stump is 25-30 ft,  IR is center weighted

[lildaddy75249]

I did all the above still this is as bright as it gets

[JamesC]

lildaddy75249,

Please contact the Arlo Support Team to further investigate this issue. You will find several options for contacting support in the provided link. 

JamesC