Camera not recording motion arlo

[Vsztul16]

I have 3 cameras, 2 are working fine, but one is not recording motion. It gives me live feed, but that is it. Please help.

[StephenB]

---

@Vsztul16 wrote:
I have 3 cameras, 2 are working fine, but one is not recording motion. It gives me live feed, but that is it. Please help.

---

These are the original Arlo WireFree cameras?  Is the base station in the normal "ARMED" mode?

See if you can make a manual recording.  If that works, then check the motion sensing with the motion detection test.  https://kb.arlo.com/1114344/How-do-I-use-the-motion-detection-test-for-my-Arlo-device

[Vsztul16]

Base station is armed and I still can't get any motion detection. I tried the motion detection sensor moving it up and down and nothing happened.

[StephenB]

---

@Vsztul16 wrote:
 I tried the motion detection sensor moving it up and down and nothing happened.

---

If the motion detection test I linked in earlier fails, then maybe try removing/replacing the batteries (e.g., reboot the camera), and see if it comes back.

If it doesn't, then the camera hardware has likely failed. It sounds like it's out of warranty - if so, you'd need to get a new one. The old one could still be cross-triggered though.

[Vsztul16 · Accepted solution]

Thanks for the advice. I took out battery and then put it back in and motion is now being detected. Thanks for taking the time to respond.