Arlo|Smart Home Security|Wireless HD Security Cameras|NETGEAR
Reply
Tutor

Re: Geofencing DEFECT In/Out of Zone

Same issue here. Since the new base update both of my base stations don't change the mode to armed when I leave geofencing zone. This is very dangerous, not just frustrating as we - owners of your products are relying for such simple features as this one.

Before this update it was usually working, so this update was a step back.

 

2x VMB4000r3

Message 26 of 60
Star

Re: Geofencing DEFECT In/Out of Zone

Same for me. Just got a new IPhone XR, Arlo app continues to show it as an enabled device but "out of zone." Genfencing engages when I leave the zone but it doesn't arm. Frustrating as hell, I've tried everything and it still does it. 

Message 27 of 60

Re: Geofencing DEFECT In/Out of Zone

After further testing I'm convinced, at least in my case, that the problem was the custom mode I created became somehow corrupt and stopped interacting with the geofence mode. The custom mode would still work, it just simply stopped working with geofencing.

 

For geofencing I had it set to the stock Armed mode when I was away and a custom mode when I was at home. The custom mode was identical to Armed only it sent no notifications.

 

It worked for about a month and then last week suddenly stopped working. After fiddling around with it for a few days I happened to try creating a new custom mode which was the same as my original custom mode....armed but no notifications. Geofencing immediately started working again.

 

As a test I set it back to use the original custom mode and sure enough, geofencing failed to recognize when I returned home.

 

After four days the new custom mode continues to work with geofencing.

 

FYI...probably doesn't matter but I left the original and haven't deleted it yet.

 

iPhone iOS 12.3.1. Arlo apps 2.7.9 and 2.7.10.

Model: VMS5440 | Arlo Ultra 4 Camera Kit
Message 28 of 60
Aspirant

Re: Geofencing DEFECT In/Out of Zone

Ditto.  Ibib.  Op Cit.  Have both ios and Android phones.  I have seen posts over the last couple of years.  Does anyone from Netgear monitor and respond to these customer forums?  

 

Message 29 of 60

Re: Geofencing DEFECT In/Out of Zone

In another thread a number of people mentioned the recent updated Arlo app, 2.7.10 fixed their problem with geofencing.

 

I had already updated the app to 2.7.10 on my iPhone Xs but I still had the original custom mode which had stopped working with geofencing when returning home. As a test I switched geofencing to use the old custom mode. It failed to recognize my returning home. 

 

So in my case it doesn't look like the updating the Arlo app to 2.7.10 would have fixed my geofencing mode. But at least it is working for me currently using the new custom mode I had created.

Model: VMS5440 | Arlo Ultra 4 Camera Kit
Message 30 of 60
Highlighted
Star

Re: Geofencing DEFECT In/Out of Zone

ColoArtist, thank you for the input, but I am not able to use your solution.  You see, my home mode is the “schedule”.  I did have a custom mode within my schedule so I did delete and replace that mode with a brand new custom mode that was identical to the old one, but my geofencing still does not recognize that I have returned home even though both devices are designated as in-zone.  Since I cannot replace the standard “schedule” mode I am out of luck until Arlo releases a fix.  I am hopeful that your solution provides a fix for those who use custom modes directly as their primary mode for returning to the monitored location.

 

AG

Message 31 of 60

Re: Geofencing DEFECT In/Out of Zone

So received the Arlo iPhone app update last night and guess what......?   IT STILL DOESN'T WORK.....

 

Still does not disarm the camera even though I get a message stating "In-Zone"

 

Come on Netgear.  Pull your finger out and fix this debacle

Message 32 of 60
XJW Apprentice
Apprentice

Re: Geofencing DEFECT In/Out of Zone

I am trying to recall how long Geofencing has been broken. Is it 3 or 4 years ?

It has never worked effectively. The last defect I raised on corrupted home/away modes took close to a year to resolve.

Arlo have never had effective technical support for product defects.

Arlo need new leaders to better prioritise and manage support if they want to reduce brand damaging customer reviews.
Message 33 of 60
Tutor

Re: Geofencing DEFECT In/Out of Zone

I hate to say this too loud but my geofencing disarmed this morning when I came back home from being out of the zone. I'm on the .10 version as of a couple days ago, but this is the first time it has actually worked the way it's supposed to since the update. Of course, now that I say that, it will likely stop working. I should just delete this post. Nothing to see here, people, move along. These are not the droids you're looking for. Smiley Wink

Message 34 of 60
Star

Re: Geofencing DEFECT In/Out of Zone

My geofencing worked flawlessly until I got a new phone, now it’s like trying to put a square peg in a round hole, I’ve tried everything literally a dozen times, still can’t get it to go to armed when I leave the zone. I’ve given up, manual mode will have to do.


@KelleyO wrote:

I hate to say this too loud but my geofencing disarmed this morning when I came back home from being out of the zone. I'm on the .10 version as of a couple days ago, but this is the first time it has actually worked the way it's supposed to since the update. Of course, now that I say that, it will likely stop working. I should just delete this post. Nothing to see here, people, move along. These are not the droids you're looking for. Smiley Wink


 

Message 35 of 60
XJW Apprentice
Apprentice

Re: Geofencing DEFECT In/Out of Zone

@DeanRichards   Note that this is no longer a Netgear Product.  Netgear offloaded Arlo some time ago.  You would have thought Netgear would have wanted to retain a "smart" product but perhaps they had observed the performance of the development team. 

 

I am guessing that we are observing another Agile development team that interpret Agile as a lazy minded excuse to apply no discipline, standards or quality.

 

If Arlo would implement IFTTT custom modes we could solve two big issues with Arlo ourselves.  We could implement a reliable Geofencing solution in under 10 minutes.  We could implement simple home screen shortcuts to activate / deactivate Arlo with a single touch rather than trawl through menus and wait endlessly for the servers to respond.

Message 36 of 60
Star

Re: Geofencing DEFECT In/Out of Zone

Without making any changes today my geofencing changed to home mode when we entered the geofencing area.  This just started working again today and I did not make any changes for the last several days.  I checked when we left the house and the geofencing changed to our away mode and when we returned to the geofencing area the mode changed to our home mode.  Not sure if this was corrected by Arlo but it worked at least once today.

 

AG

Message 37 of 60
Tutor

Re: Geofencing DEFECT In/Out of Zone

It appears that it started working for me as well today.
Message 38 of 60

Re: Geofencing DEFECT In/Out of Zone

Funny thing happened to me on the way to work this morning.........    ARLO disarmed itself.....  lets just hope it continues to work properly now.   No more App updates for me.

Model: VMS5140 | Arlo Ultra 1 Camera Kit
Message 39 of 60
Guide

Re: Geofencing DEFECT In/Out of Zone

Interesting indeed. I saw these messages so i enabled geofencing and left the house today. It switched into away mode AND switched back to home mode when i got back.

The app doesnt seem to have changed so maybe it was a server side issue and I'd now working.

Lets give it s couple of days and im sure others will comment.

Perhaps we have been heard, which is a good thing.
Message 40 of 60
Guide

Re: Geofencing DEFECT In/Out of Zone

Spoke too soon. Arlo Ultras on iOS are not working. Geofencing showed my wife home before me, but it did not disarm. An alert said I was home when I got there, but it did not disarm.
Message 41 of 60
Guide

Re: Geofencing DEFECT In/Out of Zone

Another day, and another success. Geofencing worked in and out....

 

So since the app hasn't updated, I'm guessing that the Hub/Basestation has updated. Before the success, I had numerous hours of flashing orange light on the hub, and gave up worrying. I've noticed that it's been solid blue for awhile and maybe that was where the bug fix came from.

 

This is my hub's versions

 

HW VersionVMB5000r4
 
Firmware1.12.2.0_33535
Model: VMS5240 | Arlo Ultra 2 Camera Kit
Message 42 of 60
Apprentice

Re: Geofencing DEFECT In/Out of Zone

This is definitely not fixed for me, in fact it's worse than what it was the past week or week and a half

 

Now, even disarming and then putting it back on geofencing doesn't "fix" the problem like it used to

Model: VMS5140 | Arlo Ultra 1 Camera Kit
Message 43 of 60
Community Manager

Re: Geofencing DEFECT In/Out of Zone

Arlo’s geofencing feature is now working as expected for most customers. We apologize for the inconvenience and appreciate your patience during this time.

 

For more details on how to add and manage multiple mobile devices for geofencing, please see this Arlo Knowledge Base Article.

 

Our team is committed to optimizing this feature for all users and their various use cases. With this in mind, Arlo will soon host a survey to collect more specific feedback around users’ environment and set up. We would appreciate your participation in this survey as the information you share will assist our team to enhance our products to best meet our customers’ demands.

 

Thank you,

 

Arlo Team

 

Our team is aware that some users are still experiencing issues with the geofencing capability and this feature may not be working as expected. We apologize for the inconvenience and appreciate your patience while our team further investigates this matter. We will provide an update on this issue by 3PM PT/June 6, 2019.

 

Thank you,

 

Arlo Team

Message 44 of 60

Re: Geofencing DEFECT In/Out of Zone

Well, all was going well for a couple of days.   Now my wife's iPhone X Max is not showing In-Zone or disarming the camera now.  Same problem as we have had many times before and it is back.

 

I give up on this Arlo product.  Too much time wasted trying to get the product to function correctly, and I especially for the price that was paid for it.  I could have purchased a cheaper full security system for the price of one ARLO camera, which would work as it says on the box.

Message 45 of 60
Community Manager

Re: Geofencing DEFECT In/Out of Zone

For those still experiencing issues with Geofencing after the fixes we've released, please take a look at this article for troubleshooting steps you can take to improve performance: Why isn't the Geofencing mode working?

 

JamesC

Message 46 of 60
Star

Re: Geofencing DEFECT In/Out of Zone

Problem solved. I had the Arlo app on my Ipad and my Iphone, deleted it from my Ipad, now geofencing works perfectly. Apparently you can only keep it on one device, phone, to engage properly. 

Message 47 of 60
Guide

Re: Geofencing DEFECT In/Out of Zone

Doesn’t solve most, who have more than one person at home.
Message 48 of 60
Star

Re: Geofencing DEFECT In/Out of Zone

Oh I know, but for those of us with one person in the home it's a relief. Hopefully Arlo gets it figured out. 

Message 49 of 60
Guide

Re: Geofencing DEFECT In/Out of Zone

My wife was the first home tonight. Neither of ours deactivated the alarms. Both phones were recognized as in the zone.

She now has full administrative rights and her phone was set to geofencing.
Message 50 of 60