- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have Arlo Pro cameras and just today my geofencing is not working. I am home and the app says that I am "In Zone", yet it is saying that the system is armed. I also noticed that Arlo Smart is not filtering, and it is allowing all motion for one of my cameras to come through when it should only be People. Is there a bug? Any help would be appreciated. I already tried unplugging the base station and restarting. Thanks!
Solved! Go to Solution.
- Related Labels:
-
Online and Mobile Apps
-
Troubleshooting
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@JessicaP wrote:
For those still experiencing issues with Geofencing after the fixes we've released, please take a look at this article for troubleshooting steps you can take to improve performance: Why isn't the Geofencing mode working?
Already tred this/verified all of this several days ago when I was doing my own troubleshooting.
The problem we seem to be having is related to the fact that we have secondary/granted access accounts enabled. From what I've seen, if you set up geofencing to only use the main account, everything works as expected. However, if you add another device for a secondary account, things do not appear to work so well - it seems to work if the owner account is the last to leave the zone/first to enter, but if the secondary account leaves last or enters first, it will not switch.
I've noticed weird things with the secondary account device that I posted earlier that are probably related. Reposting this again:
If I change the mode to disarmed on the secondary phone, then change the mode back to geofencing on the same phone, nothing happens. The mode will show that is geofencing/disarmed (Disarmed is not part of my home/away modes). If I do the same thing on my phone linked to the main owner account, it will change to either the home/away mode and show the push notification with the change (though the secondary phone does NOT get the notification even though it is checked to receive them).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@RSC1 wrote:
I guess I’m too much of a new technology purchaser and see this in almost all new products. Of course, the people who are happy are not here complaining.
It’s usually safer to wait six months to a year after a product is introduced, if you cannot accept development issues. Many of these issues cannot be foreseen until they’re in use.
I have confidence that they’ll fix this, just like Nikon fixed it’s D200 and many other cameras that had firmware issues not identified until in wide use.
Arlo has been around for 3 years, Geofencing has been part of it for over 2 years. How long do you think is a reasonable wait for it to be fixed?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am the owner of all of these devices. She has Access rights to all of them.
So this appears to work properly for Arlo Q and Q Plus cameras.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using geofencing with my husband. It had worked perfect before both of us updated Arlo mobile App version 2.7.10 (released date: 28 May 2019) in iPhones. After we updated the App, the system changes to alarm when I leave home and my husband is still home. When I get home the system is still alarming. Please advise how to resolve it. Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@JessicaP wrote:
For those still experiencing issues with Geofencing after the fixes we've released, please take a look at this article for troubleshooting steps you can take to improve performance: Why isn't the Geofencing mode working?
Yep. None of those know issues apply. My wife and I have one iPhone each that are used for determining geofencing. She has access rights (aka administrative rights in sharing). She is recognized as out of zone by six Arlo devices at the same location. Five of those devices (Q and Q Plus cameras) correctly shift to away mode, but the Arlo Pro base for the Wireless cameras, does not change to Away mode. It stays in home mode.
I’d be happy to work with a second or third level support engineer or a real developer on diagnosing this, but I’m not going to waste my time calling customer support so I can get talked through all of the scripts and the basic troubleshooting techniques or worse yet...asked to perform a lot of unrelated tasks to see if by magic it might start working.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Wouldn’t it be really cool if we could click on a “System Report” button that would gather up all of our configuration data and place it in a file that we could upload to Arlo, so the engineers could see exactly how our apps and devices are configured rather than asking for screenshots and verbal/written answers to questions. This is what Axis has. Click and upload....then they can look at facts as reported by the code they wrote...with no opportunity for user error and with much lower time invested by customers and the company as well.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks!
Your fix worked for me. I’m afraid to add my second device back in, but for now geofence working for me
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Totally agree with what Frostbach just posted
"Already tred this/verified all of this several days ago when I was doing my own troubleshooting.
The problem we seem to be having is related to the fact that we have secondary/granted access accounts enabled. From what I've seen, if you set up geofencing to only use the main account, everything works as expected. However, if you add another device for a secondary account, things do not appear to work so well - it seems to work if the owner account is the last to leave the zone/first to enter, but if the secondary account leaves last or enters first, it will not switch."
I have 2 iOS devices (both running up to date software and app is up to date). The above statement seems to ring true. I have done all of the "trouble shooting" of uninstalling, deleting icloud, re-setting the base station and setting up from scratch. This is all crap, it was functional prior to the "update" in late May. Therefore, why can't you roll back the firmware to what worked
This artile is now close to 500 replies. Surely that is proof enough that there is still a problem with the firmware.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
My wife did not have administrative rights when it was working. Her job is in a location where cell service is nonexistent. So no location service can find her most of the day. Yet, it worked flawlessly last month.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Just needs to run in the background and during the phone setup, when ARLO worked, you would set it to Locations ALWAYS.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
agreed.... They cant roll back if they are NOT looking at the support issues.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
yes. this is rediculous. its a provable issue.
the system recognizes the secondary device as 'in zone' but fails to switch to 'home mode' and disarm
all the admin user needs to do to get the system to perform the correct disarm action is switch the mode to anything besides geofencing, and then immediately back to geofencing.
given the above, this should be an easy fix.
you have all the info you need netgear. stop sucking.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There never used to have to be any heroics to get this to work prior to May. The apps did NOT have to be running in the background on ANY of the associated devices. Once a device was associated to the account and added to the geofencing list it worked - even with multiple devices. When all devices were in zone, it correctly changed to home mode. When last device left in zone, changed to away mode. It even worked great with combining schedules with geofencing. About a year ago for a period occasionally a phone would get the message lost connection and simply had to reopen app and it went back to working fine. That had not occurred for 9 months UNTIL May 2019.
Arlo please STOP blaming this issue on your users, STOP saying it is fixed yet the symptoms and underlying way it is not working changes, STOP pointing us to the FAQ document on how to set up Geofencing - most of us complaining on this forum had it working PERFECTLY fine before it stopped working in May. FIX geofencing if you care about a) continuing to make new sales as otherwise we will continue to share with potential customers this is still not working and b) those of us paying for the premium packages will cease to do so.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've been sitting back following this thread & have all the same issues.
I work in IT & have been recommending Arlo to customers and justifying the premium price by the quality of the product. I now have customers calling & emailing wanting me to fix their geofencing which has suddenly stopped working. Up till this last update it was working perfectly. Last employee out arms the system and first one in disarms.
Same for me at home. Now I can be in a meeting with a customer & my phone starts going crazy because my wife has arrived home from work & picking up the kids from school and they are playing in the driveway. It's not doing the battery life any good either.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
sAdam Aspirant Aspirant
2019-06-12 04:04 PM
Re: Geofencing not disarming when I arrive home after iOS app update 2.7.9
yes. this is rediculous. its a provable issue.
the system recognizes the secondary device as 'in zone' but fails to switch to 'home mode' and disarm
all the admin user needs to do to get the system to perform the correct disarm action is switch the mode to anything besides geofencing, and then immediately back to geofencing.
given the above, this should be an easy fix.
you have all the info you need netgear. stop sucking.
—————
The process you describe here does not work for me. I’ve tried it ... at least not in “away mode”. I have to manually arm the system and leave geofencing off.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm using the first Gen Arlo cameras https://www.arlo.com/au/products/add-on/vmc3030.aspx.
All camera's are the same models as well as the base station.
If it was a firmware issue then I wouldn't be able to do geofencing on either basestation.
But one works fine the other one not at all as I'm always away even when standing beside it.
Both basestations have the same firmware.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@garej704 wrote:
I'm using the first Gen Arlo cameras https://www.arlo.com/au/products/add-on/vmc3030.aspx.
All camera's are the same models as well as the base station.
If it was a firmware issue then I wouldn't be able to do geofencing on either basestation.
But one works fine the other one not at all as I'm always away even when standing beside it.
Both basestations have the same firmware.
That is intriguing. Are both base stations the same hardware revision (you already confirmed firmware) and are you sure the settings are identical on both of them. If that is the case, then it would be interesting to jump through the hoops that have been suggested by some...basically deinstalling the entire malfunctioning system and reinstalling it from scratch to see if there is some odd state or bad data in some obscure place causing the malfunction .
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jessica
these are the same things supprt asked me to do over the phone, nothing has been fixed
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Same issue here (2 iOS devices - disarms on my mobile - keeps armed when my wife's mobile is in the zone)