Mode

[Retired_Member]

recording ends at the beginning of the minute. Not at the end of the minute. Starts at the beginning of the minute. That's fine

[jguerdat]

I'm not sure what you're trying to say. Recordings start independent of when in the minute it's triggered and ends independent of the minute also.

[Retired_Member]

when I set 11.59 end and 00.00 start, 1 minute is disarmed

[samual19]

tell more about your problem cant understand with this information..

[jguerdat]

Test the end time and start time to see if it really creates a gap. In the past the stop time resulted in the whole minute of that stop time being active but a while ago there was indeed a gap. If your test shows that there's a minute gap where detection isn't working, set the stop and start times to be identical. Otherwise, use the one minute separation.

[Retired_Member]

for example, it should record from 19.00 to 07.00 but the reality is 23.58 recording 23.59 not recording 00.00 recording

[JessicaP]

Hi Ervin1,

Are you referring to the schedule mode when recording? You should be able to set it as 7-11:59 PM armed and 12-7AM as armed to make sure you don't miss any recordings.

[Retired_Member]

Hi JessicaP. Yes you are right and I understand.But I still record error at 11.59 o'clock.Only the one minute.Other everything is fine

[JessicaP]

Have you tried re-creating the schedule with the web client on your computer to see if that helps?

[Retired_Member]

Tried but does not help

[JessicaP]

I would suggest to contact the Support Team to further investigate this issue. You will find several options for contacting support in the provided link.