Camera not detecting motion

[Lalbe]

Hello, Camera will not record or detect motion . Live works . Any suggestions? Sometimes it randomly will start detecting but then when I change the battery it stops detecting. 

[DannyBearAgain]

Always check that motion detection is working correctly after changing the battery.

To fix, remove the battery again for 10sec and insert again. Resets the camera .

If that fails to resolve then perform a camera resync by momentarily pressing the base top sync button then do the same for the camera top sync button to resync the camera.

[BrookeN]

@Lalbe are you still seeing this same behavior? 

[Lalbe]

Yes, Camera still will not detect motion. 

[StephenB]

---

@Lalbe wrote:

Camera will not record or detect motion .

---

First, confirm that you can make a manual recording while Livestreaming the camera.

If that still works, then try the motion detection test.  (Go into the camera settings -> default mode settings.  You'll find the test there).

[rlh72152]

I have the same problem with 2 Pro 2's.  I had cameras in standby for several months.  batteries were low, so i changed the batterys.  Now they won't detect motion.  the work in live mode, and i have tested for motion detection and the amber light flashes with motion.  But the cameras will not detect and record motion.

Richard

[StephenB]

---

@rlh72152 wrote:

I have the same problem with 2 Pro 2's.  I had cameras in standby for several months.  batteries were low, so i changed the batterys.  Now they won't detect motion.  the work in live mode, and i have tested for motion detection and the amber light flashes with motion.  But the cameras will not detect and record motion.

---

Have you double-checked the camera rules in the mode you are using?