Live view fails after viewing one Arlo app Android version 5.5.0_28795

[secaz]

Anyone else have this odd behavior with Android app.

Happens with cameras on a base station which has 8 cameras connected.

If I make the rounds of cameras connected to this base station and live view each camera one by one, but then decide to go back and live view a camera I had just previously viewed, the interface for the camera just flickers when pressing view.  And not just the one camera, ALL the cameras connected to that base station will suddenly present with this same behavior.

Just one of Arlo's many deficiencies.

This just recently started.

The camera settings are still accessible and and be manipulated, but can't do a live view.

Rebooting phone doesn't help.  Closing and opening app doesn't help.  Doing either multiple times doesn't help. Clearing clearing app cache or rebooting and then clearing the partition cache for my phone doesn't help (Samsung S21 Ultra 5G).

I have to just wait a while and eventually these cameras will return to normal and I can do a live view of them once more..

Makes me wonder if these cameras are continuing to stream in the background after I stop the live view and then eventually return to a sane mode of operation.

The other two base stations only have 3 cameras connected to each and do not exhibit this behaviors.

No idea if the web portal is the same way as the web portal will only allow me view a single camera at a time so I can't recreate.  The web portal is useless anyway.

[Streak2]

Try and power cycle (remove power, wait a few seconds and plug back in again) the base to which those cameras are connected. Once the cameras have reconnected to the base then try again.

What about the web interface don't you like? 

I can get multiple cameras to live stream and use the web interface much more than I use the mobile app.

Do you have the Library or Feed version of the app?

[secaz]

Have tried the old unplug from power wait 30 seconds and plug back in - makes no difference.

I can only stream 1 camera at a time with the web portal - no idea why.

The web portal is less than convenient when I am away - and again, can only stream 1 camera at a time that's not particularly convenient either.  Once upon a time with the old web portal I could stream up to 3 at a time.

Used to be able to steam all 8 cameras at once using the Android app - but Arlo has done a real number on that lately it's a train wreck.  So much dysfunction.

It's pretty predictable - if I stream a bunch of cameras on that one base station (it's also the newer of the three base stations I have), if I back peddle and again do a live view for a camera I had just streamed, nothing happens, screen for the camera just twitches, and then every other camera will exhibit the same behavior, am unable to live view any camera connected to that base station.  So have to give up and wait a while then it's fine again.  The base station remains on line and you can edit details for each camera, just cant live view until enough time has passed and whatever brain hemorrhage Arlo had is finally over.

I could just connect cameras to other base stations but afraid the same behavior will happen, and the other two base stations have my forward facing cameras in the front of my property connected to them, so prefer those don't wig out on me when I really need the live view to work.  So not inclined to mess with those - it is isn't broke don't fix it, after all.

[BrookeN]

@secaz lets see if the update that will be here within the next few days resolves this behavior you are seeing as well. I will check back in with you the beginning of next week to see if you were able to update and see if the behavior changed. 

[secaz]

Just installed new app version 5.5.2_28806 problem persists.

Doesn't seem to matter how many cameras I try to stream, either.  I first thought it was being disagreeable when I would stream many at a time, but the behavior is the same even if I stream a couple and then back peddle to view a previously streamed camera.  There's no discernible pattern, doesn't matter which camera I start with.

I converted to the Feed version back in January, I think it was, and initially did not have issues viewing cameras on this base station which has 8 cameras.  This started within the last week or so.

I often switch back and forth between viewing cameras on this base station for the back of my property.  Checking for dangerous critters before I go out with my dogs at night.  I live in a dark sky community so when it's dark it's DARK.  Have had bobcats out there so I make sure the coast is clear before I venture out there at night.  Sometimes something will catch my eye moving towards a camera that I had already viewed, so I'll go back to that camera but the view bombs.  If I wait a while, like 5 minutes or so, then all the cameras are back to normal.

And again, this behavior doesn't happen on the other two base stations which only have 3 cameras each.

[secaz]

Had nothing better to do this morning so removed the affected base station from my account and added it back, then sync'd all 8 cameras to it.  Left everything at defaults settings, and still same behavior.  If I stream a few cameras and then back peddle to a camera previously streamed, the screen for the camera just twitches, then all the cameras will twitch if I try to stream them.  Have to wait several minutes at least for things to settle down, then it will work again.

This is a recent issue since I upgraded to the Feed version.

[secaz]

In addition, swapped out Ethernet cable, connected base station to a different network switch which is connected to a different router that's on a different subnet - no difference in behavior.

Have tried connecting base station directly to router, same behavior regardless if base station is connected directly to router or a network switch connected to router.

Have swapped power adapters.

It's nothing I've done, which has always been the case with anything that goes awry with Arlo.

I actually used to have MORE than 8 cameras on this base station, and when I was on the Library version, never had any issues.

And so...

To test I streamed 4 cameras at once then stopped the live view for each.  Moved on the the next 4 cameras, streamed each of those then stopped the live feed for each.  Then tried to stream any random camera on that base station which had been previously streamed and the screen for that camera will just twitch, move on to other cameras on that base station and they all will twitch as well, no live view.  Have to wait several minutes, maybe 5, and then everything will go back to normal.  Then behavior will repeat.

Other two base stations are just fine - 3 cameras each no issues, and that's pretty much the only difference between them and the dysfunctional one, the ones which behave as expected only have 3 cameras each.

When the live view wigs out, I can STILL go into the camera settings and make adjustments.  I can even got into activity zones and it will present a current snapshot of the camera.  So it will take a snapshot for use with activity zones after it has wigged out, but won't let me live view after it wigs out.  Makes zero sense.

[Streak2]

No doubt you have 3 bases to make sure that all cameras have a good signal based on your property size.

While not the best solution but more of a test, remove one or 2 of the 8 cameras on that base and link them to one of the other bases, even if you have to move the cameras closer to get a good signal.

Let's then analyze the results.

Is the 8 camera base connected to your router using the same routing as the other 2 bases ie, direct ethernet as opposed to via any switches or other extender devices?

What is your internet speed?

[BrookeN]

Thank you for all this information. I have sent it to the development team to look into this further. I will reach back out soon.

[secaz]

You are welcome.

It appears as if 3 is the magic number per session.

I can stream 3 unique cameras, either together or individually, stop those 3, start streaming them again - it's ok.

However - if I then stream a 4th camera that's not one of the 3 cameras that I had previously streamed, and then go back to stream one of the ORIGINAL 3 from that session - it wigs out, and will effect all cameras on that base station, whether they have been streamed or not during that session.  That's it, party over, have to wait 5 minutes or so for everything to return to normal before I can again stream any of the cameras.

[StephenB]

---

@secaz wrote:

You are welcome.

It appears as if 3 is the magic number per session.

I can stream 3 unique cameras, either together or individually, stop those 3, start streaming them again - it's ok.

However - if I then stream a 4th camera that's not one of the 3 cameras that I had previously streamed, and then go back to stream one of the ORIGINAL 3 from that session - it wigs out, and will effect all cameras on that base station, whether they have been streamed or not during that session.  That's it, party over, have to wait 5 minutes or so for everything to return to normal before I can again stream any of the cameras.

---

What browser(s) are you using?