Arlo|Smart Home Security|Wireless HD Security Cameras
× Arlo End of Life Policy Notice
To view Arlo’s new End of Life Policy, click here.

Cannot connect Base Station

Reply
Discussion stats
  • 1 Reply
  • 2428 Views
  • 1 Like
  • 2 In Conversation
sharon_li
Follower
Follower

Cannot connect to the base station after electricity was suspensed in the buildling, after the electricity is resumed. The error "cannot connect to base station" is appeared, we have reconnect /synchronized again; the results still the same. However the signal lights are turned on as ususal, but we cannot see the base station working again. Please help!

1 ACCEPTED SOLUTION

Accepted Solutions
steve_t
Master Master
Master

Try a factory reset ie use a paperclip etc to hold the reset button it. It takes about 10s for the green power LED to change to amber. Then release and wait for the system to power on and the power LED will go green, the internet LED should go green and the camera LED will probably be off. Then login through the app. Add the base station. Then sync the cameras

View solution in original post

1 REPLY 1
steve_t
Master Master
Master

Try a factory reset ie use a paperclip etc to hold the reset button it. It takes about 10s for the green power LED to change to amber. Then release and wait for the system to power on and the power LED will go green, the internet LED should go green and the camera LED will probably be off. Then login through the app. Add the base station. Then sync the cameras