Arlo|Smart Home Security|Wireless HD Security Cameras

Camera(s) stops recording - reboot only solution

Reply
Discussion stats
Highlighted
Guide
Guide
@ShayneS

Thanks! My hub is updated, and everything is online and running. Have to wait and see if the recording stops or not.
Highlighted
Arlo Moderator
Arlo Moderator

Hi @Seattlegrunge @n1976jmk @LandJS

 

How is everything going after the new firmware release?

 

 

Highlighted
Virtuoso
Virtuoso

Thank you for asking @ShayneS .

 

i have had no issue since the recent firmware update  and reinstalling my SD card thankfully.

 

it is also working better with notifications within my activity zone again as well.  Probably due to the hub not locking up so easily anymore.

Highlighted
Prodigy
Prodigy

ShanyeS as I posted at the time, the instructions from JamesC didn't work so after five I had to do as before and remove the hub, factory reset and start over, that did finally get the update.  It did go offline once while manually re-syncing the cameras and had to get it back to finish.  So working for now and only time will tell.  One thing I did notice is that it seems to be doing a much better job of recording until motion stops than it was.  Not sure that was even in the fix but glad to see.  There was no fix for the 4K live that is still 2K.  Irritating only because it's a feature, I don't use it much.  And thanks for checking back.

Highlighted
Tutor
Tutor

Sign me up for a class action lawsuit against Arlo.  They have no problem taking my subscription fee for 11 cameras but they can't help but break my system at least once a month.  All motion detection on my basestation stopped but mysteriously my other basestation is working just fine.  Hours on chat with support and a removal of my camera to re-add it although somehow the basestation no longer syncs with devices.  I'm sure this is leading to a full reset of all devices which is hours worth of work with no guarantee of this not happening in a month again.

Model: VMB5000 | Arlo Ultra SmartHub
Highlighted
Guide
Guide
@ShayneS

My hub has been online for approximately 24h now, since the last reboot. And everything seems to work properly. The cameras are recording, I haven't been forced to reboot. I am crossing my fingers that it will work properly from now on.

Thanks for listening to us, and for providing us a fix. Although you could have been a little quicker 😉
Highlighted
Arlo Moderator
Arlo Moderator

@jprikios

 

This specific issue was only affecting the Arlo Ultra smart hub with 5 or more Arlo Ultra cameras. Does your other base station/cameras fall within this category?

 

If you need further assistance, Please contact the Support Team to further investigate this issue. Arlo Tech Support

Highlighted
Virtuoso
Virtuoso

@ShayneS 

 

my Ultra system was definitely affected

 

i have 2 Ultra cameras, an Arlo audio doorbell and Arlo door chime.

Highlighted
Tutor
Tutor
That’s the odd thing. Only the five cameras attached to one of the base stations was problematic. The other base station as respective cameras work just fine.
Model: VMB5000 | Arlo Ultra SmartHub
Highlighted
Guide
Guide
@ShayneS @JamesC

Sorry to say it, but the update have not fixed the problem. Now, more than 48 hours since last hub reboot, I noticed that one of my cameras stopped recording. The camera says the last movement it recognized was 18 hours ago, but the latest recording from that camera is more than 26 hours old. And all day long it hasn't recognized or recorded movements.

So... the problem is still there. Nothing has been fixed 😞 The only difference now is that the problem did occur much later than before. Earlier it occurred several times a day.

You can remove the "Solved" and "Go to solution" icons in this thread.
Please find a fix asap.
Highlighted
Aspirant
Aspirant

Cameras stop recording.. no camera icon appears on either 1 of my 2 cameras.. what is really going on? I’m using Arlo ultra and I have rest my system and to no help cause it still not working.

Highlighted
Apprentice
Apprentice
I have this problem too. One of my Ultra cameras will seemingly "go to sleep", stops recording on motion. Rebooting will restore but it will happen again. It's not always th same camera.
Highlighted
Prodigy
Prodigy

That is something I've been watching since the firmware fix.  All cameras will have 2 or 3 bars after a reboot and then one will drop to red and struggle.  Reboot and that camera is fine but another camera drops to red, reboot and those two are fine but another drops to red.  Enough reboots get them all back to 2 or 3 bars until the next time.  It's as if the hub is struggling to handle all the cameras.  Before the April 27 update I never had a camera in the red.

Highlighted
Apprentice
Apprentice
Sounds like maybe the Smarthub is trying different wifi channels. I recall prior posts about forcing (locking in) your hub to certain wifi channels. How does one do this and once done, would that solve the switching and struggling?
Highlighted
Aspirant
Aspirant

I’ve have 8 Arlo ultra cameras installed for 2 months and everything worked great. Suddenly they don’t record and send notifications. We can live view and manually record. I manually tested the motion detection and it is working. Has anyone solved this problem?

Model: VMB5000 | Arlo Ultra SmartHub
Highlighted
Prodigy
Prodigy

whether it works or not is try it.  Log in to your router and go to 2.4 and change the channel from auto to your choice and save.  With 2.4 it's often 1, 6 or 11 that's best.  Go to 5 ghz and change from auto to your choice and save.  My analyzer says to use 36 but I have done best with 153.  Now everything on your system will be on those channels.  Some like it, some don't.  Kind of depends on the traffic in your area which you can find out with a analyzer app.  If it doesn't help just log back in and go back to auto.   One thing I did that I think helps is in the router go to QoS  and set the priority to streaming.  A lot a gamer's will set it to gaming.

Highlighted
Apprentice
Apprentice
I'm happy to try it, but if the Smarthub to Camera Wifi is all handled internally, can changing the router wifi channels still do some good?
Highlighted
Prodigy
Prodigy

That would be the question but it would force Arlo to use those two channels.  Whether they are the best two for you would be trial and error.  Everyone's house design, where they put router and Arlo, how many people live in your area and are using what channels will be as different as there are people.  I used to find the two that worked best for me after a reboot to lock Arlo to them and then go back and put the router on auto putting my laptops and printer, TV's etc back to what came up.  After awhile I saw that anything that caused Arlo to boot or such would just go back to what was.  So it became lock everything to those two channels or hope Arlo produced a better hub.  It's crazy that they struggle so much when my home router functions fine 400 feet away and I can stream 4K movies to a RV 70 feet away with it.

Highlighted
Apprentice
Apprentice
Ok, so you're suggesting that I lock the Arlo Smarthub to an Ethernet channel to my router, since my router has no control of what wifi channels the base station uses to talk to the cameras?
Highlighted
Guide
Guide
@HazzMatt @LandJS

Sorry, but you are discussing a totally different problem in this thread, a thread that highlights the problem with cameras not recognizing motion/stop recording.

@ShayneS @JamesC

The problem with cameras not recognizing motion/stop recording several times a day is NOT SOLVED! Still have to reboot the smart hub once or twice every day to get all cameras work properly... for a couple of hours (up to approximately 20 hours).
The constant rebooting is not the way to go. This expensive system must work! I don't like talking about law suits and such, but soon there will be no other option for all of us that experience this and other problems with Arlo Ultra.

Please listen do everything you can for your customers, it is us that have made Arlo being Arlo by buying your systems for several years.
Highlighted
Apprentice
Apprentice
I got the impression from others here that the wifi channel issue was causing motion recording to fail. So I certainly was it intentional discussing a different topic. Even Arlo support brought up poor wifi and maybe being the culprit. Take care...
Highlighted
Guide
Guide
If that is the case, sorry, but why would this suddenly occur? The system has been working, and suddenly the issue discussed in this thread comes from nowhere.
All routers can't suddenly interfere with the smart hub. That is what I think.
Highlighted
Aspirant
Aspirant

I get a lot of exercise going up and down the ladder. It works, it doesn't work. Camera was switched out once. The camera is well in range of base. Called my Internet provider, verified the channel, verified all the settings. Yes, yes, rebooted, many times, rebooted the Internet many times. At this point, I've learned to just leave it and hope that it starts working again. Can't keep setting up the ladder on my house. You guys should just say "re-pairing it every few days." Because that's the only thing that fixes it. So inconvenient, just get your ladder out to re-pair it every day. Pain in the ass. 

Model: VMB4540 | Arlo Pro 3 SmartHub
Highlighted
Aspirant
Aspirant
My Arlo Ultra camera has suddenly stopped detecting or recording motion, in the app the motion symbol is always yellow as if it is constantly recording. Yet it isn’t because the battery hasn’t run down. I can view a livestream.
Model: VMB4000 | Arlo Pro/Pro2 Base Station
Highlighted
Tutor
Tutor
Same with me Arlo ultras shows the yellow light in the app as it detects motion. But it does not send a record of video to the cloud and my last few days are blank on the library. I have restarted and turned internet off and on but noting makes them record and I always keep my batteries charged. I have recently started paying by the month. I can also live stream and do everything as normal and the night light even comes on it senses I’m there and blinds me all the time lol but never records.
Discussion stats