- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi All.
Hope everyone is keeping safe and well.
Since the early hours of yesterday morning (25th April) UK time all of my Arlo Pro cameras have been suffering from extreme pixelation in both live view and motion detection recordings. The location of the cameras and base station have not changed for months.
The base station is VMB4000r3 on firmware 1.16.1.1_3348_facf74c
The four cameras are version H8 1.092.0.25_24_986
The pixelated video is also present on local USB storage suggesting a local issue.
I have checked WiFi strength using an analyser and all is good. All cameras have three bars in the Arlo app.
One of the cameras is within ten feet of the base station with no obstructions and is suffering the same.
I have noticed that a camera firmware update was issued in the last few days. Are there any known problems that could have caused such a drastic change in system performance?
Solved! Go to Solution.
- Related Labels:
-
Troubleshooting
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi All,
My firmware release ID hasn't changed at all since just after this was originally reported (986 camera, 1a608C1 for base).
If there has been an update over the last couple of days then the Arlo engineering team are staying true to form (i.e. terrible software development standards) and haven't updated the firmware release number!
It is possible that something has changed. I have noticed slightly less pixilation over the last couple of days but I still have horrendous frame drops and often have people and vehicles leaving a trail of blocks behind them as they move. Any object that is moving is surrounded by lots of noise around their edges.
Bitrate on my 720p Pro cameras for an equivalent shot from the same camera as that posted on page one of this thread is coming in at 428kbps which is slightly higher than the 350-400 experienced after the April update. This is still nowhere near the 700-750kbps experienced before the April update, which was in itself lower than before the May 2019 disaster.
So, in summary. IF the update has happened it hasn't been flagged with a new firmware release ID and IF there has been a bitrate change it is still insufficient to restore a reasonable quality picture.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The video image quality I’m getting is still not what it was as compared to archived videos I have on file and way below 720P standards. When reviewing both new and archived videos today I also noticed the quality of the audio is way down when compared to older videos. I certainly hope this is not Arlo’s solution to this issue.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I wouldn’t expect any changes made over a holiday weekend. I’m as disappointed as everyone else, but changes take time and people to implement and it’s not always able to happen overnight.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Well I'm still having the same problems, video pixelation and dropping out. This screen shot was just a few minutes ago.
![](/skins/images/EF14C295FF39EC238D5B90C6F9E5554E/responsive_peak/images/icon_anonymous_message.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm seeing performance similar to that reported by @Ordinary1 and @CCNE37 . Pixelation not as bad, but still somewhat there. Bitrate slightly higher. But images are still pretty low resolution. Used to be that I could make out details of the grass on the lawn. Now, it's just a blurry sea of green. Glad someone's apparently working on it, but still hoping for a significant improvement.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Don't see the fix yet.
If the camera firmware isn't updated, the compression isn't being addressed. In an earlier post, I mention two issues.
(1) a recent change that overcompresses the stream
(2) a bug that exacerbates the issue of (1)
Fixing only (2) still doesn't address the significant compression increase this Spring. This compression reduces the usable resolution of these cameras into legal peril territory.
We can attribute (1) is a BUG as the feature that is published as a feature but doesn't do anything (video quality setting) illustrates this isn't normal behavior. Forget the fact that any motion smears (pixelates) the subject and the surrounding areas around that subject.
BTW- Has release notes been made available? If/when they are, I hope that details of what they are claiming to fix are explained further. FYI- I haven't seen an update, nor any change in my camera quality (for either Pro or Pro 2).
One thing I can't believe is all these recently posted 4 and 5-star glowing reviews on BestBuy, where the reviewers focus primarily on video 'quality.' That site doesn't allow one to identify "verified purchase" users. Could these reviews be illegitimate? The only other thing I can think of is that newer purchases perform better before being downgraded. Perhaps Arlo is not pushing the latest firmware to newly activated cameras while they fix ours that are suffering (hopefully). I'd hate to think that there is some intentional sabotaging going on with the older-run ones in service.
Anyone recently (last 7-10 days) purchase the Pro or Pro 2 base station/kit that can comment on the quality?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Company's pay people to post good reviews on there product, look it up, at any rate I guess we will have to purchase an Ultra to get 1080? Not going to happen here and all this is so they can boost sales on the pro3 and Ultra by downgrading are system. But I will tell you I will never buy an Arlo product again if they don't fix this, who can trust a sneeky company.
WHERE YOU AT MATT MCRAE CEO. I pm'ed you with no response. I told my lawyer to stand down for now and see in the next few days due to what JessciaP said in an earlier reply as they are working on it.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What did your lawyer say has going to do before you told him to stand down.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@silverado44 wrote:WHERE YOU AT MATT MCRAE CEO. I pm'ed you with no response. I told my lawyer to stand down for now and see in the next few days due to what JessciaP said in an earlier reply as they are working on it.
I bet he doesn't give a flying crap...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Incredulous, I just received a reply back from Arlo regarding my BBB complaint (see response below). Arlo's defense to this issue is that I agreed to let them remove features, change service, etc. when I created my Arlo account. I did not agree to let them turn my security camera system into something that is not usable for the purpose I bought this for. This is pure evil and companies like this should be put out of business. My state has very strong consumer laws and this behavior will not be tolerated.
"Good Day!
Thank you for submitting your complaint. I would like to convey to you our sincere apologies for the inconvenience you have experienced with your device. This issue has no doubt caused you some frustration and we want you to know that this is certainly not typical of our organization. Arlo Technologies, Inc. takes great pride in maintaining a reputation for excellence.
Please let me assure you that we continue to be committed in providing you and all of our customers with the highest standards of product & service in the industry. We value your business, and I am responding to discuss your concern further.
I understand that you want to have a full refund for your Arlo Pro 2 system since it is not working for you as a security camera since the quality of the video has been degraded. With regards to this, please be informed that our Arlo Devices comes with a year of hardware warranty. You have used the system for more than 2 years now and it is already out of its warranty entitlement.
You have also agreed to our terms and conditions upon account creation. Under Section 5 - Changes to your Arlo Service. It clearly states the following "To the extent possible under the governing law, ARLO may, at its discretion and without notice or user permission, change, add, or remove features and functionality of the Arlo Services. ARLO is under no obligation to provide any or all features and functionality to your Arlo System and may, at its discretion, discontinue the provision of software updates to certain Arlo Systems. Because different Arlo Systems may support different features and functionality the level of service ARLO provides may not be the same for each Arlo System."
With that being said, we will not be able to grant your product refund request.
Please let me know if you have further questions or clarifications. Thank you for choosing ARLO!
Regards,
Elbert Val Lambo
Customer Care Advocate
Arlo Technologies, Inc."
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What an astonishing reply from Arlo. Doesn't look as if video quality will ever be restored to that which it was when the cameras were purchased. The Arlo Pro and Pro2 cameras will likely be sacrificed to provide for the increased storage requirements of the newer high resolution cameras .....
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@dcfox1 wrote:
What did your lawyer say has going to do before you told him to stand down.
Deceptive Advertising and some other that I cant remember the terms he used, the advertising states 1080 and that what it should be for the life of the product.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Would love for a class action about deceptive advertising though.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As we shared Friday, the new software update has now been deployed and your Arlo system should have downloaded it by now. If you are continuing to see the same issue, please reach out to us at 408-638-3750.
- Arlo Team
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @JessicaP
Many thanks for the update and I apologise in advance for the rant that follows, but as you are the only Arlo representative that has seen fit to respond to us I can only use you as a conduit for feedback. My earlier requests for a formal complaints procedure (as per recommended official UK Trading Standards process) have been ignored.
As per my post further up this page, I have noticed a SLIGHT improvement in the picture quality but it is nowhere near as good as it was before the April firmware update, which in itself was worse that the pre May 2019 firmware fiasco.
I am not alone in this, there are a few posts above from those that have noticed a slight change but still have issues. I still have jerky motion and often have a trail of blocks being left behind moving objects, neither of which were apparent between October 2019 (previous camera update) and April 2020. My conditions have not changed. Looking at the bitrate of videos taken from yesterday there has been perhaps a 10% uptick in this 'fix' against a 50% quality reduction in April.
The firmware on my camera and base station have not changed since April - can you confirm that this was not deployed as a firmware update so I can at least rule that out as a possible cause ?
Re. the telephone number, I am assuming that this is in the US ? I am a UK customer, do I have a local number I can dial rather than taking the cost of an international call to talk to a service desk who, frankly, aren't particularly capable and I have no faith will resolve the problem ?
The issue lies with the video compression, I think the posts here have proven that consistently. Calling the US will lead to me logging exactly the same details for exactly the same outcome.
The engineering team have done SOMETHING to uptick the bitrate over the last few days, they NEED to uptick this higher to satisfy your customer base.
Hobbling a system through firmware updates that degrade system quality is nothing short of a scandal that needs to be outed.
I paid for a system two years ago that I was very happy with. This is not a hardware warranty failure issue. All of my cameras are physically fine thanks very much. ARLO have degraded the system through software and if they think that it is acceptable then it looks like you have a fight coming from a number of your customers.
In summary, I do not consider this issue resolved until the engineers address the compression issue once and for all.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Also..Why is this showing as 'Solved' with an 'Accepted Solution'.
Who says it is solved and who has accepted it ? As the originator of this thread I certainly haven't.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Agree with everything @Ordinary1 just said, including appreciation for Jessica's feedback. Firmware versions on my VMB4000r3 base station, Pro and Pro 2 cameras are unchanged. Less pixelation, but still jerky movement, noticeably blurrier images than before, occasional blocky artifacts in the picture, etc. Looks like the video quality selection has been at least partly restored. A quick test on one of my Pro 2 cameras with virtually identical scenes showed the following when switching Power Management from Best Battery to Best Video:
- Best Battery Life - 18.27 frames/sec, 443 kbps Total Bitrate (1920 x 1072)
- Best Video - 23.79 frames/sec, 539 kbps Total Bitrate (1920 x 1072)
Agree that more needs to be done. Seems to me that Best Video total bitrate on the Pro 2 really needs to be at least 1000 kbps, with maybe 700-800 on the Pro.
For reference, a Google search turned up that Nest reduced the bitrate on their IQ cameras sometime in April to help conserve global bandwidth during the pandemic. However, with two important differences over Arlo. Nest just changed everyone's quality settings to a lower value, allowing users to change it back if they wished. More importantly, they notified users by email that they were doing so. They got a lot of pushback from unhappy users for overriding settings. But I thought, compared to Arlo's approach, they look stellar in the way they handled it.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
To add, even if ARLO reserves the right to change their service at any time, what we have is a change of service without notice.
Either (1) it is a bug or (2) it was a change of feature without providing the public notice of the change. (2) may be problematic for them as they have continued to promote their legacy product. Beyond false advertising, it would be interesting to see how legal interpretation is set on core functions being considered "features"
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
"As we shared Friday, the new software update has now been deployed and your Arlo system should have downloaded it by now. If you are continuing to see the same issue, please reach out to us at 408-638-3750."
@JessicaP OK- what has been deployed? I've checked two different base stations with other family members and all of the Pro and Pro 2 cameras and do not see any changes and checked for new versions, which there were none. In addition, (1) There have been no release notes submitted, (2) there has been no change in our firmware version, (3) there were no details on what was deployed nor even a link from your last note aiding us trying to identify what has been changed, and (4) there has been no changes in quality of these camera feeds since Friday. Firmware versions/dates are at the bottom.
Why are we encouraging people to call in, especially without even the basic details above being provided? This request to call in is an unnecessary cost (to either Arlo or customers who have to pay past their 90 days). Or are we trying to 'end' this thread?
Since the message is signed as the 'Arlo team,' who posted it?
BTW- it would be nice if your web team can fix the base stations' device info page to display the firmware version. All other devices have this detail. Customers now have to go to the phone app to see the version, and in those apps, we can't even copy-and-paste from the app to search online. All of this results in customers being forced to type the firmware version to search manually. Not a great customer experience.
Here is what hasn't changed since April. What release(s) have been pushed since below?
- Base station VMB4000 - 1.16.1.3_3394_1a608c1 (released 2020-04-27)
- Base station VMB4500 - 1.16.1.3_3305_1a608c1 (released 2020-04-27)
- Pro Camera - 1.092.0.25_24_986 (released 2020-04-21)
- Pro 2 Camera - 1.125.14.0_34_1189 (released late April *)
(* release date as evidence in forum posts, 1.125.14.0_31_1189 is the official release posting on 2020-04-22. Perhaps the posting has a typo?)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How about a compromise? Let us by a backup hardrive and store our footage there? You can take the bitrate back to normal and save your cloud storage. The live stream is still pixelated and the recordings are great.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Edit see below
-
Apple HomeKit
1 -
Arlo Mobile App
341 -
Arlo Pro
27 -
Arlo Pro 2
1 -
Arlo Pro 3
2 -
Arlo Secure
1 -
Arlo Smart
81 -
Arlo Ultra
1 -
Arlo Web and Mobile Apps
6 -
Arlo Wire-Free
10 -
Before You Buy
1,180 -
Discovery
1 -
Features
201 -
Firmware
1 -
Firmware Release Notes
119 -
Hardware
2 -
IFTTT
1 -
IFTTT (If This Then That)
48 -
Installation
1,396 -
Installation & Upgrade
1 -
Online and Mobile Apps
1,266 -
Partner Integrations
1 -
Security
1 -
Service and Storage
563 -
Smart Subscription
1 -
SmartThings
39 -
Software & Apps
1 -
Troubleshooting
7,130 -
Videos
1
- « Previous
- Next »