Set Up and Sync Your Arlo Cameras.

[Chuck-VA]

When setting up and Syncing Your Cameras

Any reference to “Press the Sync button”

Should read “Momentarily Press the Sync button”

"Wait for the sync status LED to blink green"

Or “Press and release the Sync button” as in the downloadable only Manual.

Caution: the manual states "Wait for the Sync Status LED on the base station to light green"

where in fact you should:

"Wait for the sync status LED to blink green"

====

https://community.netgear.com/t5/Arlo-Knowledge-Base/How-do-I-set-up-and-sync-my-Arlo-Wire-Free-came...

Says :

Press the Sync button on the side of the base station.

Wait for the sync status LED to blink green.

Press the Sync button on top of the camera. Cameras must be synced one at a time

=====

Downloadable User guide says

Press and release the Sync button on the side of the base station

Wait for the Sync Status LED on the base station to light green

Press and release the Sync button on top of the camera.

[JamesC]

Chuck-VA,

Thanks for the feedback, I will escalate this topic for additional clarification.

JamesC