O rings for Ultra 2 Camera & Housing

[Sheppeyboy]

Where can I source replacement O rings which are used between Camera & Housing?

Seems many people have asked but no response from Arlo

Thanks

[Dgmi]

Great question!!  there should be an ARLO parts catalog  

My equipment is still fairly new, but I can see how some of these items get worn/lost specially after so many in/out cycle when replacing the batteries. 

watching this thread, as I’ll prob need some eventually

[Sheppeyboy]

MY CAMERAS ARE OVER 2 YEARS OLD AND O RINGS ARE GETTING WORN!

THIS QUESTION HAS BEEN ASKED MANY TIMES AND NO ANSWERS, ARLO DOESN'T KEEP THE O RINGS IS THE USUAL RESPONSE................

[jguerdat]

More specifically, Arlo has NO replacement parts. Certain things can be replaced by contacting support (requires a subscription) but otherwise you have to search on your own. The local hardware store may be a good source - take your old o-ring or even the camera to see if they have anything that would work. 

I recently needed an o-ring that the hardware store didn't have. They suggested a nearby company that had tons of different size o-rings so I went there. They provided me with 2 slightly different sizes to make sure one would work - for free. YMMV.

[TomMac]

Same here... found a local hardware store that had a box of assorted o-rings ( for a pro camera )... found one close enough to work.

Tho I do recommend using silicon grease on the o-rings to stop a lot of the wear/tear  ( local hardware, dive shop, pool center, etc ) Only takes a little and stop the camera from sticking inside housing.

[Sheppeyboy]

Thanks, I used silicone grease already as a diver use it for my underwater camera etc so familiar with it.

Can find any local o ring suppliers to suit the Arlo though

[jguerdat]

Try carefully measuring the overall diameter and thickness to see if an Internet search shows anything. They can't be unique.

[Sheppeyboy · Accepted solution]

As ARLO doesn’t supply O-ring replacements for the ARLO ULTRA 2 camera, I went to a UK supplier of Seals & O-rings etc with the camera and O-ring required, they measured it and found a replacement at £0.20 per O-ring, the replacement O-ring fits perfectly.

Their reference is: 0500-15 NBR70 NITRILE O RING 50mm x 1.5mm

M Barnwell Services Limited

Reginald Road,

Smethwick

West Midlands B67 5AS

United Kingdom

Tel: (0121) 429 8011 (20 Lines)

[jguerdat]

Thanks for posting the specs - that should help those needing to replace the o-ring a lot.