Two cameras synced perfectly. Third camera will not sync.

[Overlookgoldens]

I bought three cameras and one home base as a set. Two cameras are perfect. I didn’t set the third one up, but decided to finally do it. The third camera will not sync at all. No lights, nothing. I know the battery is fine because I exchanged it from one of the fully charged working cameras. 

‘Any ideas?

thanks,

bob

[Arlo123]

Try to powercycle your base first before syncing the 3rd camera. Let your base be unplugged form outlet for about a minute. After you powercycle it, try removing the batteries of the camera for 5 seconds then re-insert it. Then sync the camera to the base by pressing the sync button on the base for 2 seconds, theny press sync on camera for 2 seconds. It works for me.

🙂

[jguerdat]

Also, when you first install the battery, verify that the blue LED flashes briefly to indicate power. If that doesn't happen, nothing will work.

I would also recommend NOT holding the base sync button for 2 seconds but just press it briefly. 2 seconds may be ok but too long causes an issue.