Automation not following Scheduled time to change

[Agostino]

Bonjour,

depuis l'installation de 2 cameras Arlo Essential 2K , j'ai du faire un update de l'application, après avoir je ne vous cache pas galérer a faire le paramétrage de celle-ci, j'ai problème avec la mise en service.

Mon paramétrage indique une mis en servie à 23h00 et tous les soirs le hub active toute les cameras à 23h05 

Matériel VMB5000r4 firmware 1.24.0.1_1607_8938370

"Hello,

Since the installation of 2 Arlo Essential 2K cameras, I had to do an update of the application, after having I do not hide you struggling to make the configuration of it, I have a problem with the commissioning.

My setting indicates a service at 11:00 p.m. and every evening the hub activates all the cameras at 11:05 p.m.

Hardware VMB5000r4 firmware 1.24.0.1_1607_8938370"

[ShayneS]

@Agostino 

Thanks for the feedback. I will look in to this and provide more info as soon as possible. 

[StephenB]

---

@Agostino wrote:

My setting indicates a service at 11:00 p.m. and every evening the hub activates all the cameras at 11:05 p.m.

Hardware VMB5000r4 firmware 1.24.0.1_1607_8938370"

---

Essential 2K cameras can't be connected to your smarthub.

Are all the cameras being armed at the same time (11:05 pm)?  

[jguerdat]

I have a somewhat similar issue but I assumed it was caused by use of an Arlo Home Security System. Before I had the security system set up, the schedule worked flawlessly. Now the nighttime switch of modes to Arm Away varies from the desired 11:00PM to 11:05PM. This post sounds like it's not the security system per se that's causing the issue but firmware/backend software that the new user interface which uses Feed has introduced.

@ShayneS would you please add this to the problem description? 

[ShayneS]

Hi @Agostino 

The symptoms you were experiencing with the scheduling changes should now be resolved. Can you reboot your base station and check again.