Arlo|Smart Home Security|Wireless HD Security Cameras
Arlo Community

Reply
Discussion stats
  • 32 Replies
  • ‎2021-07-23 09:27 AM
  • 6741 Views
  • 0 Likes
  • 8 In Conversation
SteveB101
Aspirant
Aspirant
‎2021-07-23 09:27 AM

I left home today and got the message that geofencing is in away mode. One hour later I returned and got the message geofencing is now in home mode. While I was gone the lawn maintenance guys cut the grass which in the past would have set off all the cameras if they had been armed. In this case I got no alarms. I've made no changes to the geo settings. Cameras are running 1.080.15.4_36_dd972e firmware.  Any ideas?

Labels:
0 Likes
Reply
Message 1 of 33
6,741
32 REPLIES 32
sculin21
Aspirant
Aspirant
‎2021-09-02 04:18 AM

After having reinstalled all cameras, updated to the newest firmware and updated the iOS app, geofencing has been working correctly since yesterday! Let's see how long it will work.

0 Likes
Reply
Message 26 of 33
1,783
SteveB101
Aspirant
Aspirant
‎2021-09-02 10:06 AM

Are you running IOS 14.7.1 and Arlo firmware 1.08016.1_1085f5945 ?  I'm running with this configuration and still getting the same failure I've been getting since early July.

0 Likes
Reply
Message 27 of 33
1,774
SteveB101
Aspirant
Aspirant
‎2021-09-04 10:06 AM

After getting your message, I tried geo again this morning and it worked. Still same configuration of IOS 14.7.1 and Arlo firmware 1.08016.1_1085f5945. I know the firmware is new, but funny it didn't work before. Hopefully this will be the permanent fix.

0 Likes
Reply
Message 28 of 33
1,761
SteveB101
Aspirant
Aspirant
‎2021-09-07 10:58 AM

Spoke too soon. 4 cameras are now working in geofencing and 1 does not. I've tried pulling battery numerous times, restarting, etc. Still will not arm when in away mode. The 4 others cameras seem to be working okay. 

0 Likes
Reply
Message 29 of 33
1,743
sculin21
Aspirant
Aspirant
‎2021-09-07 11:27 AM
Had exactly the same problem. Disconnect and reinstall the camera that is not working. I had to do this twice with one camera but since then ALL cameras work perfect. Restarting or removing the battery will not work.
0 Likes
Reply
Message 30 of 33
1,740
SteveB101
Aspirant
Aspirant
‎2021-09-07 12:13 PM

Okay, I'll give that a try. Thanks.

0 Likes
Reply
Message 31 of 33
1,739
SteveB101
Aspirant
Aspirant
‎2021-09-19 06:45 AM

Okay geofencing has worked for the last week, so I guess the firmware fix and reloading the cameras did the trick.  

0 Likes
Reply
Message 32 of 33
6,400
SteveB101
Aspirant
Aspirant
‎2021-09-22 08:18 AM

I give up. Everything worked great for about a week while I was on vacation. Now all of a sudden when geofencing goes into home mode it arms two of my five cameras all the others are unarmed as they should be. I've removed batteries, removed and readded the cameras, etc with no change.   

0 Likes
Reply
Message 33 of 33
1,656
Discussion stats
  • 32 Replies
  • ‎2021-07-23 09:27 AM
  • 6742 Views
  • 0 Likes
  • 8 In Conversation

Arlo
Support

Visit our support page for answers from simple setup to security optimization. Search for something specific or select a product or category for helpful articles and videos.

Visit Arlo Support

Arlo App
for Support

For personalized support specific to the Arlo products you own, access Support from within the Arlo iOS or Android App. Simply login to your Arlo App, go to Settings, Support, then select the Arlo product you would like support for.