https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946826#M94016 <P>You might want to check the specs/manual for the router to verify that. Also look at the LEDs on the port - if none are lit, that would imply no connection.</P> Mon, 12 Feb 2024 15:06:04 GMT jguerdat 2024-02-12T15:06:04Z https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946747#M94013 <P>cannot get an eithernet connection.</P> Sun, 11 Feb 2024 13:19:38 GMT https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946747#M94013 Scruggs 2024-02-11T13:19:38Z https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946750#M94014 <P>Tried a different cable and router port? If you gently pull on the cable on both ends does the cable come out without needing to push down on the connector tab? It may also be an issue with the new router not supporting a 100Mbps connection. You can try going into the router settings to see if you can change an appropriate setting. Check the manual, too.</P> Sun, 11 Feb 2024 14:36:10 GMT https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946750#M94014 jguerdat 2024-02-11T14:36:10Z https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946759#M94015 <P>Cables good even tried several cat5. Starting to think the router does not support the new 100meg.</P> Sun, 11 Feb 2024 16:09:36 GMT https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946759#M94015 Scruggs 2024-02-11T16:09:36Z https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946826#M94016 <P>You might want to check the specs/manual for the router to verify that. Also look at the LEDs on the port - if none are lit, that would imply no connection.</P> Mon, 12 Feb 2024 15:06:04 GMT https://community.arlo.com/t5/Arlo/My-Netgear-vmb3000-will-not-connect-to-the-eithernet-I-just-had/m-p/1946826#M94016 jguerdat 2024-02-12T15:06:04Z