topic Re: I can not add more than one rule to a mode. in Arlo

I can not add more than one rule to a mode.

EverLink — Wed, 28 Sep 2016 20:46:22 GMT

I can not add more than one rule to a mode. I have defined two rules: "record by motion CAM1" and "record by motion CAM2" but i can't assign both of them to a mode. The clicking on a rule works radio button like only. I have tried it on IE11 and Chrome as well.

What I have to do?

Re: I can not add more than one rule to a mode.

TomMac — Fri, 28 Aug 2015 16:34:41 GMT

The rules should show up in the MODE automaticly after saving and in there are toggled on/off with a green/black check mark

( all modes contained the same rules, just some are turned on, some off )

After you added RULES, check you ALL MOTION ON and see if they are in there ( all should be green checked )

Re : I can not add more than one rule to a mode.

FPh — Fri, 28 Aug 2015 16:37:58 GMT

Bonjour ,

J'ai supprimer une option : détecter tous les mouvements

comment remettre cette option sur le menu svp

Merci

Re : I can not add more than one rule to a mode.

TomMac — Fri, 28 Aug 2015 19:26:47 GMT

FPh wrote:
Bonjour ,

J'ai supprimer une option : détecter tous les mouvements

comment remettre cette option sur le menu svp

Merci

Add a new MODE, settings/mode/ADD ( right side of page )

Call it ALL MOTION ON, make sure every camera line has a GREEN check mark at the end.... SAVE

Re: I can not add more than one rule to a mode.

EverLink — Sat, 29 Aug 2015 12:39:59 GMT

TomMac, thank you for your help. I thought it works as you have mentioned, but it seems no. Please take a look for my video on

https://www.youtube.com/watch?v=12-DKkSWyBw&feature=youtu.be

You'll see my problem. Any idea?

Re: I can not add more than one rule to a mode.

TomMac — Sat, 29 Aug 2015 13:40:48 GMT

EverLink wrote:
TomMac, thank you for your help. I thought it works as you have mentioned, but it seems no. Please take a look for my video on
You'll see my problem. Any idea?

Thanks... as you know , it's not supposed to work like that. Picutres worth a thousand words tho...

But the answer may not be easy either...

1) try and reset the base via the power button....

2) if that does nothing, it may require a full factory reset ( and re sync of the cameras too )