https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615150#M54869 is it me, or does anyone else have extreme difficulty screwing the Arlo camera back onto the mount after changing the battery? Mon, 30 Jul 2018 17:06:23 GMT jpirhalla 2018-07-30T17:06:23Z https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615150#M54869 is it me, or does anyone else have extreme difficulty screwing the Arlo camera back onto the mount after changing the battery? Mon, 30 Jul 2018 17:06:23 GMT https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615150#M54869 jpirhalla 2018-07-30T17:06:23Z https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615157#M54870 I used to. Now i put a very little amount of lithium grease on the threads twice a year. Not an issue for me. It could also be that you cross threaded it one time and now the threads are not inline Mon, 30 Jul 2018 17:15:43 GMT https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615157#M54870 Wklovelace3 2018-07-30T17:15:43Z https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615159#M54871 <P>if you loosen the lock screw, then turn the camera , it should go back easy the same way...you don't lose the angle setting of the mount.</P> Mon, 30 Jul 2018 17:16:52 GMT https://community.arlo.com/t5/Arlo/Screw-mount-angle/m-p/1615159#M54871 TomMac 2018-07-30T17:16:52Z