topic Re: The camera failed to connect. Try again. Message keeps appearing in Arlo

The camera failed to connect. Try again. Message keeps appearing

Lisa712212 — Thu, 27 Apr 2017 14:41:54 GMT

Hoping for a little help. My cameras were all working great until yesterday.

Everytime I log on to the app I am getting a "camera failed to connect. Try again" on the screen. This is happening with all of the cameras. Any ideas of what this could be. I tried resyncing the cameras but that has not seemed to help.

Thanks!

Re: The camera failed to connect. Try again. Message keeps appearing

gildrush — Thu, 27 Apr 2017 15:23:14 GMT

Are all three green led's on the Base lit? If so, try logging out of Arlo, then log back in. Hope that helps.

Re: The camera failed to connect. Try again. Message keeps appearing

Lisa712212 — Thu, 27 Apr 2017 15:27:37 GMT

Hi,

I am not at home to look at the base but I tried to restart it from my phone. I did try logging out and also restarting my phone but nothing has worked.

Thanks for the suggestions.

Re: The camera failed to connect. Try again. Message keeps appearing

Ms_Wit — Fri, 28 Apr 2017 20:06:23 GMT

I am experiencing the same problem. Syncing or signing in & out is no help. Support information suggests a "Restart" through the device settings. Unfortunately, that option does NOT appear on the menu!

Any additional suggestions would be appreciated. Thanks!

Re: The camera failed to connect. Try again. Message keeps appearing

jguerdat — Fri, 28 Apr 2017 22:05:12 GMT

Only physical presencewill help. A UPS/battery backup can help fly through power outages can help this and a WeMo or similar WiFi switch so you can remotely power cycle the base may be useful.

Re: The camera failed to connect. Try again. Message keeps appearing

Ms_Wit — Fri, 28 Apr 2017 22:50:13 GMT

Would you believe I went through a whole bunch of nonsense to learn that the only "fix" was to replace the batteries! ALL OF THEM!!

Sad thing; I had just replaced them for one of the cameras.

Here is what I did: 1) Shut down/restarted the modem and the router. 2) Found the "Restart" button on the BASE device. 3) Started to sync

the cameras - no results. 4) Replace the batteries.

You might want to start with number 4 first. I couldn't believe that ALL the batteries went out at the same time, either.

Re: The camera failed to connect. Try again. Message keeps appearing

jguerdat — Sat, 29 Apr 2017 12:36:20 GMT

If the cameras have lost connection to the base, the batteries will relatively rapidly deplete since they're constantly trying to reconnect. I don't know exactly how fast they'll deplete but it's much faster than just sitting there. SInce the batteries were already in use with unknown levels, it's quite possible that it wouldn't take long to drain to nothing which would explain needing to replace all batteries at the same time.

Re: The camera failed to connect. Try again. Message keeps appearing

Ms_Wit — Sat, 29 Apr 2017 15:34:08 GMT

Now, that makes sense. Thank you!

Re: The camera failed to connect. Try again. Message keeps appearing

MonicaDuMont — Tue, 04 Jul 2017 22:12:08 GMT

I continue to have problems with this system. After months I finally fixed it, but lasted for a week. Now it says FAILED TO CONNECT. Have tried the following -

1. replace batteries

2. Resync cameras

3. Shut down app on phone and restart

4. Shut down app on computer and restart

5. Scream lol

Not sure what else to do - but this is crazy!

THX

Re: The camera failed to connect. Try again. Message keeps appearing

JamesC — Wed, 05 Jul 2017 22:59:55 GMT

MonicaDuMont,

It sounds like the signal strength between the camera and the base could be weak or being interrupted.

How far from the base is the camera? Are there any other nearby wireless devices that could be interfering with the signal?

JamesC

Re: The camera failed to connect. Try again. Message keeps appearing

MonicaDuMont — Thu, 06 Jul 2017 04:19:30 GMT

I have no clue what to try next. Can someone please assist!

I have the cameras no more then 30 feet away from the base station.

I cannot spend this much time on these cameras - any suggestion. Have worked less then 1/4 of the time!

Re: The camera failed to connect. Try again. Message keeps appearing

jguerdat — Thu, 06 Jul 2017 14:52:23 GMT

30 feet can be too far depending on various things that impede the signal. Try moving one or more close to the base to see if they still do the same thing. When the issue pops up, what are the LEDs on the base showing, including color? Open a case with support using the Contact Support link at the bottom here.

Re: The camera failed to connect. Try again. Message keeps appearing

samman — Mon, 02 Oct 2017 20:48:41 GMT

My unit is 5 ft from the wireless router and I cannot connect. My other unit is 30 ft away and is currently streaming. Sometimes it's reversed. There is something seriously wrong with their service. I just bought an Arlo Q Plus thinking that the hardwired line would be more stable but sadly no. It's craps out just the same.

I call support and their solution is for me to change my password to arlo123 so they login -- UNACCEPTABLE privacy violation! They don't have to other tools to diagnose connections problems?!? FYI remove and re-adding the devices is a waste of time.

One thing I notice Arlo uses AWS but for some reason I get routed to the EU-WEST instance even though I'm in the US on the east coast -- that could explain my high latency.

Think this is gonna have to be a return.

Re: The camera failed to connect. Try again. Message keeps appearing

JamesC — Wed, 04 Oct 2017 22:12:03 GMT

samman,

Is the issue intermittent or does it always occur every time you try to live stream? Do you see the same behavior when using the web client and mobile app?

JamesC

Re: The camera failed to connect. Try again. Message keeps appearing

samman — Wed, 04 Oct 2017 22:29:35 GMT

Intermittent.

Both web and app.

Re: The camera failed to connect. Try again. Message keeps appearing

JamesC — Thu, 05 Oct 2017 15:55:37 GMT

samman,

You might try swapping locations with the working camera to see if the behavior follows the camera or the location.

JamesC

Re: The camera failed to connect. Try again. Message keeps appearing

Rhpoch — Mon, 20 Nov 2017 18:22:34 GMT

Regret this purchase, the system will notify you if a camera picks up motion but that’s about it. A lot of false alarms, insects setting off camera for example. Audio NEVER works. Tried it all, restart, change batteries, log out/in. So tired of netgear and never getting issues resolved.

Re: The camera failed to connect. Try again. Message keeps appearing

JamesC — Wed, 22 Nov 2017 17:47:56 GMT

Rhpoch,

It can sometimes take some trial and error to find optimal conditions for your Arlo system.

Take a look at the tips in this article to be sure your cameras are positioned for best performance: How do I optimize motion detection for my Arlo Wire-Free, Arlo Pro Wire-Free, Arlo Pro 2 Wire-Free, or Arlo Go camera?

JamesC

Re: The camera failed to connect. Try again. Message keeps appearing

Silverdodge — Tue, 19 Dec 2017 13:31:56 GMT

I have same infuriating issue where after live streaming the camera will go into some mode where you get the camera failed to connect message and the only way to fix it is to unplug the camera and plug it back in. What a piece of junk!

Re: The camera failed to connect. Try again. Message keeps appearing

Adietan — Wed, 27 Dec 2017 05:57:07 GMT

This may not apply to everyone. I recently bought the system for my parents in China. After installing the system I was able to live view for a while and all of the sudden was getting the same “camera failed to connect ...” message. However I can still view recorded clips. After going through the different suggestions in this tread without success I realized at some point I have turned ON VPN on my phone. Once I disabled VPN live view start to work again. Apparently once VPN is ON, my phone no longer belong to the same Network as the camera, which is a requirement for live view to work.