https://community.arlo.com/t5/Arlo/After-the-batteries-have-died-my-camera-won-t-sync/m-p/1346356#M40603 <P>After the batteries have died my camera won't sync with the base station again. If I push the sinc button on the camera the LED will start flashing slowly not rapidly as it is supposed to when starting the sinc. Have removed batteries several times and started over. Always does the same thing .... can anybody help? Thks Holger</P> Mon, 14 Aug 2017 15:31:28 GMT TRUDE-Hamburg 2017-08-14T15:31:28Z https://community.arlo.com/t5/Arlo/After-the-batteries-have-died-my-camera-won-t-sync/m-p/1346356#M40603 <P>After the batteries have died my camera won't sync with the base station again. If I push the sinc button on the camera the LED will start flashing slowly not rapidly as it is supposed to when starting the sinc. Have removed batteries several times and started over. Always does the same thing .... can anybody help? Thks Holger</P> Mon, 14 Aug 2017 15:31:28 GMT https://community.arlo.com/t5/Arlo/After-the-batteries-have-died-my-camera-won-t-sync/m-p/1346356#M40603 TRUDE-Hamburg 2017-08-14T15:31:28Z https://community.arlo.com/t5/Arlo/After-the-batteries-have-died-my-camera-won-t-sync/m-p/1346366#M40604 <P>You shouldn't even need to resync when you change batteries. Just closing the battery compartment door should have it reconnect. Failing that, remove the camera from your device list. Hit the sync button on the base station and the camera light will blink green. Hit the sync button on your camera and it will blink blue. If it doesn't connect then, go through the process again but with your main router's wifi turned off but ethernet still providing the base station with internet</P> <P>Good luck</P> Mon, 14 Aug 2017 15:31:50 GMT https://community.arlo.com/t5/Arlo/After-the-batteries-have-died-my-camera-won-t-sync/m-p/1346366#M40604 steve_t 2017-08-14T15:31:50Z