topic Re: BASE STATIOM vmb3000 will not connect to device in Arlo

BASE STATIOM vmb3000 will not connect to device

rock9000 — Mon, 17 Apr 2017 23:24:28 GMT

Dont know why I cannot connect base station to mobile device or laptop. One time the base station was recognized but froze after requesting I set up a login name and password. Tried factory rest (rset & syn buttons pressed for 10 + seconds and the lights do not turn amber. any help appreciated.

Re: BASE STATIOM vmb3000 will not connect to device

jguerdat — Tue, 18 Apr 2017 00:13:00 GMT

Reset for the past 1+ year has been just the reset button by itself. Hold that until the LEDs flash amber and try again.

Re: BASE STATIOM vmb3000 will not connect to device

rock9000 — Tue, 18 Apr 2017 00:16:54 GMT

Thanks for your quick reply, i actually manged to find this info and managed to reset. As I have both th power and interner lights on it would seem that my router settings are te cause of not being able to find the base on my devices... any idea how to change these settings? thanks

Re: BASE STATIOM vmb3000 will not connect to device

jguerdat — Tue, 18 Apr 2017 12:04:50 GMT

Are the power and Internet LEDs green? If not, that's an issue that has to be resolved first.

Router settings can vary, particularly if the router is supplied by the ISP. Do you own it? If so, a quick solution would be to reset the router to stock configuration. Be sure you know your WiFi SSID(s) and passphrases so you can quickly set that back up. WHat router is it?

Re: BASE STATIOM vmb3000 will not connect to device

kroyster — Wed, 12 Jul 2017 18:06:10 GMT

Device is offline not connected to the internet is what my cammera say. There are no green lights just one ambe light.. Model no. VMB3000

Re: BASE STATIOM vmb3000 will not connect to device

jguerdat — Wed, 12 Jul 2017 18:54:58 GMT

Is it the power LED that's Amber? If so, that's your problem. The base hasn't powered up correctly.

Power cycle the base. If that do help, remove all devices from Settings, My Devices and start fresh. You must have both the power and Internet LEDs green or it won't work.

If still no good, open a case with support using the Contact Support link at the bottom here. It's a hardware problem.