topic Re: Camera wont show live video or record on motion in Arlo

Camera wont show live video or record on motion

gaz40 — Thu, 23 Feb 2017 01:35:15 GMT

I have one camera that was previously working fine that now won't record video on motion activation or when show live video. When selecting live video it comes up with a "camera failed to connect message". Camera is sync'd and motion sensing is working. Firmware version is 1.2.10342, but 3 other camera are the same and working fine. Any ideals or is the camera broken?

Re: Camera wont show live video or record on motion

TomMac — Thu, 23 Feb 2017 04:22:54 GMT

Open the battery door for a few secs and close, it should auto resync...test again for motion record

Re: Camera wont show live video or record on motion

gaz40 — Thu, 23 Feb 2017 05:04:49 GMT

I've tried that several times. Makes no diffrence. Thanks

Re: Camera wont show live video or record on motion

TomMac — Thu, 23 Feb 2017 13:22:40 GMT

Ok... next is to go to Settings, and use REMOVE DEVICE

Power button reboot the base

Bring back the camera as if new ( resync )

Re: Camera wont show live video or record on motion

BobbyS — Fri, 07 Apr 2017 22:59:26 GMT

I have one camera that has worked fine until yesterday I opened the battery cover, reset, re sync, rebooted the base unit and nothing is working. Still shows camera has timed out or lost connection or camera failed to connect. Also when it shows live view the picture looks like white image

Re: Camera wont show live video or record on motion

BobbyS — Fri, 07 Apr 2017 23:00:40 GMT

Did that 3 times it didn't work

Re: Camera wont show live video or record on motion

jguerdat — Sat, 08 Apr 2017 01:05:51 GMT

Open a case with support using the Contact Support link at the bottom here.