https://community.arlo.com/t5/Arlo/Unable-to-sync-any-camera/m-p/1250848#M31275 <P>Power cycle the base then make sure you only briefly press the base sync button - don't hold it.</P> Mon, 20 Mar 2017 20:36:32 GMT jguerdat 2017-03-20T20:36:32Z https://community.arlo.com/t5/Arlo/Unable-to-sync-any-camera/m-p/1250258#M31232 <P>I just purchased the Arlo 2 camera system and a separate additional camera. I connected the based station, got the power and internet lights green and attempted to sync the cameras. None of the cameras work. I noticed the red exclamation point indicating the base station needed a firmware update - the update was completed. Tried the cameras again and none would sync. I have reset/removed the base from my devices in the app multpile times. I had an extender I was using, I unplugged it, reset/removed the based and re-installed. The cameras still will not sync. I am plugged directly into my cable router/modem. The base shows in the app as armed and it is connected to the internet per the green light on the base. When I put the batteries in the camera, the LED flashes blue. I press the sync button on the base and the light flashes green, press the button on the camera and the light flashes blue and then rapidly amber. I cannot get ANY of the three cameras to sync.&nbsp;</P> Sun, 19 Mar 2017 20:41:20 GMT https://community.arlo.com/t5/Arlo/Unable-to-sync-any-camera/m-p/1250258#M31232 luckie12b 2017-03-19T20:41:20Z https://community.arlo.com/t5/Arlo/Unable-to-sync-any-camera/m-p/1250848#M31275 <P>Power cycle the base then make sure you only briefly press the base sync button - don't hold it.</P> Mon, 20 Mar 2017 20:36:32 GMT https://community.arlo.com/t5/Arlo/Unable-to-sync-any-camera/m-p/1250848#M31275 jguerdat 2017-03-20T20:36:32Z