topic Re: Arlo video does not appear in library in Arlo

Arlo video does not appear in library

Triumph250 — Mon, 16 Jan 2017 02:38:36 GMT

Videos stopped appearing in the library. If I go to the device and do a manual recording, the video does appear in the library.

The Mode is set to "All Motion On"

The Camera is set to "motion is detected" and "record video". There is alwso a Push notification to an email.

Re: Arlo video does not appear in library

TomMac — Mon, 16 Jan 2017 12:33:49 GMT

Try a power button reboot of the base

Re: Arlo video does not appear in library

Triumph250 — Mon, 16 Jan 2017 16:16:44 GMT

Did it twice. Same result.

Re: Arlo video does not appear in library

JamesC — Tue, 17 Jan 2017 16:41:50 GMT

Triumph250,

"All Motion On" is an old mode that came standard with very old firmware. Do you have an "Armed" mode available? Does it behave the same way?

This could also be a firmware related issue, what firmware is your system running? Do you have firmware updates available?

You can check firmware by navigating to Settings > My Devices > select a device > Device Info > Firmware

JamesC

Re: Arlo video does not appear in library

Triumph250 — Tue, 17 Jan 2017 18:41:46 GMT

Hello JamesC,

I do not see an "Arned" mode. As for Firmware,

Base 1.4.2695

Cameras 1.2.2688

I do not see an option to update the Firmware nor an indicator that Firmware updates are available.

Thank you for your assistance.

Bill

Re: Arlo video does not appear in library

jguerdat — Tue, 17 Jan 2017 22:05:15 GMT

The Armed mode is found in the Mode tab. Click on your base and check out the modes there. If there is no Armed or Disarmed mode there but just All Motion On and All Motion Off, the best plan is to reset the base and start fresh. If you have all 4 modes, delete the All Motion ones and use only Armed and Disarmed. Co insider creating your own custom modes, too.

Re: Arlo video does not appear in library

Triumph250 — Wed, 18 Jan 2017 02:31:41 GMT

OK. More testing scenarios and results.

There is no Armed/Disarmed mode.

Created new Custom Mode with "record video on if motion is detected."

Restarted base.

Manual recording of camera produces entry in Library.

Motion detection recording appears to be working. Modem transmission lights flashing. Camera Positioning and Motion Detection Test indicate "Busy".

Push notification appears on smart phone.

No recording appears in Library

No email notification

At this point, it appears that there is an issue on Arlo's side.

Re: Arlo video does not appear in library

jguerdat — Wed, 18 Jan 2017 13:08:03 GMT

I think the issue is on your side although through no fault of yours.

Reset the base by removing it and all connected cameras from Settings, My Devices and start fresh. Add the base using Add Device on the Devices tab and sync cameras. That should give you Armed and Disarmed and no other modes. That should clear your issues completely.

Re: Arlo video does not appear in library

ImObersteg — Sat, 21 Jan 2017 07:14:09 GMT

I am having the same exact issue. I have rebooted/reset, changed the batteries, etc, uninstalled everything, reinstalled everything with absolutely no luck. No video recordings, and no new "armed" or "disarmed" mode. My base and cameras are updated to the same version as everyone's. When I go to my app, the library button shows there is one video recording, but when I open up the library nothing is there. I have stood in front of my cameras and they detect motion as I get alerts, but cannot find any video recording in my library. My library is completely blank. I can force a recording while on my app so I know they can record. So how can a system record ideo perfectly when you go to sleep and when you wake it just stops? Oh and those email notifications I used to get? Well I haven't seen one since that night. I sure would appreciate some assistance as I am out of ideas.

Re: Arlo video does not appear in library

jguerdat — Sat, 21 Jan 2017 13:21:06 GMT

I think you'll need to open a case with support to get this fixed - we can't do it from here.

Re: Arlo video does not appear in library

JamesC — Mon, 23 Jan 2017 18:28:03 GMT

ImObersteg,

What firmware version is your base station and cameras currently running? You can check here to see the latest firmware versions: Release Notes

JamesC

Re: Arlo video does not appear in library

Triumph250 — Wed, 01 Feb 2017 22:27:40 GMT

I finally got around to resetting the base station, added a new device (base station) in the Arlo application, replacing the batteries in the cameras and syncing the cameras to the base station. Manual recording are posted to the library. Automatic recordings are NOT posted to the library.

Needless to say, I'm getting frustrated with this product.

Re: Arlo video does not appear in library

ImObersteg — Wed, 01 Feb 2017 23:05:01 GMT

The base (VMB3010r2): 1.4.2695.

The 4 cameras (VMC3030): 1.2.2688.would update

The base and cameras all state no updates are available, though I have tried to force them to update and hoped each time they would update overnight. Tried at least ten times, if not more. I have never had a problem updating in the past - it was automatic.

As before, I can manually record, but there are no automatic recordings. I get notices of motion detection on my phone app, but no longer receive them via email.

Re: Arlo video does not appear in library

JamesC — Fri, 03 Feb 2017 18:30:55 GMT

Triumph250, ImObersteg

Both of your posts indicate old firmware on both the base station and cameras. This is likely the cause of the symptoms described above.

Poor internet connections (speed) can prevent the firmware updates from completing. What is your download/upload speed and who is you ISP?

JamesC

Re: Arlo video does not appear in library

ImObersteg — Fri, 03 Feb 2017 18:48:18 GMT

We go thru CenturyLink in Oregon. I'll have to get back to you on the download/upload speed as it is a 2nd home. Never had a problem updating before, so not sure why there is trouble now. What the update a much larger file than ever before?

Re: Arlo video does not appear in library

ImObersteg — Sat, 04 Feb 2017 00:40:43 GMT

Another new development: One of my cameras is now showing everything in pink today. What is causing this?

Re: Arlo video does not appear in library

jguerdat — Sat, 04 Feb 2017 13:52:57 GMT

The IR filter is stuck. You can try opening and closing the battery door but if it persists you'll need to open a case with support.

Re: Arlo video does not appear in library

Triumph250 — Thu, 09 Feb 2017 04:05:49 GMT

JamesC,

This issue was with an older verion of the Firmware. I have AT&T DSL as the service provider and the speed is not very fast. I was able to take the base station and cameras to anther location to apply the updates. The system is functional again and recordings are being posted to the library.

My concern is that this will happen again. Other than upgrading the network speed (which is not available), is there anything I can do?

Thanks for your help.

Re: Arlo video does not appear in library

jguerdat — Thu, 09 Feb 2017 14:13:36 GMT

Not really. Maybe with the new firmware things will work better in the first place. Maybe not...

Re: Arlo video does not appear in library

27 — Sat, 18 Mar 2017 23:53:28 GMT

I receive notification of activity (motions) via email and I can see such when I click on the email. However, when I go to my library, the screen in the library is green...the same color as the little bird by arlo. I've unplugged all systems, removed batteries, replaced the camera with another and the library showed videos for a short time, then went back to green! Help.