topic Batteries showing empty but testing shows good in Arlo

Batteries showing empty but testing shows good

rhammond — Sat, 07 Jan 2017 19:24:56 GMT

One of my cameras sent multiple reminders that I needed to replace the batteries. (Original Arlo) I pulled the batteries and tested them and they show as full batteries. What gives? All 4 batteries were good.

Re: Batteries showing empty but testing shows good

TomMac — Sun, 08 Jan 2017 15:43:46 GMT

What type of batteries and how did you test them? ( OEM or rechargable li-ions )

How long did you use them?

Assuming they were OEM primary cells, you have to test them with a voltmeter. New OEM cells are 3.2v when new and they are dead at about 2.75-2.8v

A battery tester may still show them in the green range but it not as accurate as to the cameras.

Re: Batteries showing empty but testing shows good

Frostspray — Sun, 08 Jan 2017 16:24:45 GMT

Batteries messured ( with a Fluke voltmeter ) showing 2,8 V are showing as a dead batteri in the Arlo Camera.

This is in the only item I have ever seen this.

Around down 10% and then dead. !!!!

I'll find another system-to expencive in buying new batteries.

If I have had this info before buying-I had newer done it.

Sorry-bad product.

Re: Batteries showing empty but testing shows good

TomMac — Sun, 08 Jan 2017 22:13:48 GMT

Yes, at 2.8v, they were prob dead... they do recoup fast when pulled till they get a load.

Like mentioned, dropout is about 2.75v ...

But, how long do they last? My OEM cells run just about 4 months and I get them at an online store for about $1.40 each.

There is also two options... Netgear sells rechargeable/approved 16340 li-ion cells that run in the Arlo well... life is about 60 days for same.

Also there is a large thread on powering the Arlo cams with external power ( 9v) if you have the elec skill to do so. ( tho of course the warranty would be moot if done )