topic Re: No live picture on Cameron 2... in Arlo

No live picture on Cameron 2...

Uabtorw — Wed, 28 Sep 2016 21:29:15 GMT

I installed the system today, and first synced one camera. It worked perfect. Then I tried to adhd a 2nd camera. I follow the instructions as for the first, but the camera didnt show up. Then I resetted the camera (powercycling), and tried again. Negative result, again. Then I restarted the basestation, pushed the synd Burton and powercycling the camera. Then the camera showen up, but there is no picture avilable. Also I notice that the camera has taken abort 10% of the power in the battery during only 2 hours.

I have reseted everything and done a faktory installation, but now my ideas is drained.

Tor

Re: No live picture on Cameron 2...

GABRIELL — Sun, 14 Aug 2016 06:31:40 GMT

Have you tried to swap batteries with a working camera or insert new set of batteries?

Have you click the live button to see the camera in action?

Re: No live picture on Cameron 2...

Uabtorw — Sun, 14 Aug 2016 08:22:46 GMT

Hi,

Yes I have changed the batteries, and tested with live camera, but no picture. It has connection to the Basestation but does not show a picture. So, first camera is working, second gives no picture. It detects motion!

Apriciated your support here.

Tor

Re: No live picture on Cameron 2...

Uabtorw — Sun, 14 Aug 2016 10:15:41 GMT

Hi again.

Did go back to the shop where I bought it, and they exchanged the camera. The new camera started at once, and gives perfect picture, so it was a HW fault on one of the cameras.

Again, thanks for support here.

Tor

Re: No live picture on Cameron 2...

GABRIELL — Mon, 15 Aug 2016 05:30:23 GMT

Thank you for sharing.