https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1147621#M1683 What if your camera blinks blue slowly then after about 15 seconds goes fast amber. With fresh batteries. Sat, 01 Oct 2016 00:23:28 GMT Rgrundy 2016-10-01T00:23:28Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1145355#M1680 <P>All of my cameras went through a firmware upgrade yesterday. I had a little trouble getting some of them back on line but eventually got them all synced and working. One of the cameras went off line a short while after syncing, and I have not been able to get it back up.&nbsp;</P><P>&nbsp;</P><P>I opened the batter compartment, waited 10 seconds, closed the batter compartment. Blue light on camera comes on for 2 seconds then goes out. With my camera next to the base station, I press the sync button on base station for two seconds and release. When I press the sync button on the camera, nothing happens. No lights at all. I tried numerous times and still does the same thing. I removed the camera from my base station and tried again. Still nothing. does anyone have any ideas on what to try next?</P><P>&nbsp;</P><P>BTW, this camera has been working fine for the past year until the firmware upgrade yesterday.</P> Mon, 26 Sep 2016 19:54:47 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1145355#M1680 texbeau 2016-09-26T19:54:47Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1145589#M1681 <P>Ask netgear for the manual reset prcedure......</P> Tue, 27 Sep 2016 04:16:23 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1145589#M1681 Hula_Rock 2016-09-27T04:16:23Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1145728#M1682 <BLOCKQUOTE><HR />texbeau wrote: I press the sync button on base station for two seconds and release. When I press the sync button on the camera, nothing happens. No lights at all. I tried numerous times and still does the same thing. <BR /><HR /></BLOCKQUOTE> <P>Don't hold the sync button for 2 secs.... that's an old procedure.</P> <P>&nbsp;</P> <P>It's a quick PUSH on the base sync button and a few sec later push the camera sync button</P> Tue, 27 Sep 2016 13:43:01 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1145728#M1682 TomMac 2016-09-27T13:43:01Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1147621#M1683 What if your camera blinks blue slowly then after about 15 seconds goes fast amber. With fresh batteries. Sat, 01 Oct 2016 00:23:28 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1147621#M1683 Rgrundy 2016-10-01T00:23:28Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1147839#M1684 <P>Try removing the camera from Settings, My Devices and then sync it again. &nbsp;Any luck?</P> Sat, 01 Oct 2016 14:27:28 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1147839#M1684 jguerdat 2016-10-01T14:27:28Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1153569#M21723 When I hit sync on the base station the USB light blinks and can't sync camera Wed, 12 Oct 2016 19:28:22 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1153569#M21723 haypolly 2016-10-12T19:28:22Z https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1154092#M21787 <P>You're holding it down too long. &nbsp;Press only for &lt;1 second.</P> Thu, 13 Oct 2016 14:29:10 GMT https://community.arlo.com/t5/Arlo/1-of-my-cameras-won-t-sync-after-firmware-upgrade/m-p/1154092#M21787 jguerdat 2016-10-13T14:29:10Z