Low Battery indication when the bats are new. All above 3.2 volts

vorsicle — Thu, 29 Sep 2016 18:24:05 GMT

My Arlo keeps showing a low batt warning however the batts are new. All above 3.2 volts.

Rebooting both devices (cam and router) don't help.

Re: Low Battery indication when the bats are new. All above 3.2 volts

TomMac — Sat, 26 Mar 2016 11:16:35 GMT

First , you didn't say if they are OEM or rechargeables... some rechargeables will show as low.

New OEM batteries should be at 3.2v when tested.

So, I would pull the batteries you tested as good, and try them in a second camera ( or put another new set in the same camera ) and see if the problem follows the camera or batteries.

If it is just the one camera, then contact Netgear with a trouble ticket for possible replacement

topic Re: Low Battery indication when the bats are new. All above 3.2 volts in Arlo

Low Battery indication when the bats are new. All above 3.2 volts

Re: Low Battery indication when the bats are new. All above 3.2 volts