topic Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes. in Arlo Video Doorbell

ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjgraci89 — Tue, 26 Nov 2019 02:02:35 GMT

I received my video doorbell (AVD1001) & installed it without much difficulty. Found the network, updated the firmware & actually received three motion alerts. After about 30 minutes, I received an Arlo System Update e-mail push of a "low battery detected - 12%". Which is weird as I don't think it has a battery. I checked the App & it reported the Doorbell was no longer connected to my WiFi.

I followed the instructions to reconnect (failed), used the reset pin (failed). In both cases, the doorbell LED would not light up. Rechecked the voltage coming up from the transformer (approx 17.5 V). Then I removed the device from the App & started over. Still the LED ring would not light up to sync or pair.

Contacted ARLO through chat, the agent really couldn't help me, but scheduled a call for tomorrow AM.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjgraci89 — Tue, 26 Nov 2019 15:15:02 GMT

Arlo Support called me promptly at 9:00AM ET as scheduled. Interesting something changed overnight. The LED on the bell went from completely dark (unresponsive) last night to flashing white this morning. I tried to reinstall but still could not get it to be recognized by my Wifi. When the technician called, together we went through the same reset process that I did on my own yesterday, except for turning the cellular connection on my iPhone off. Allowing my phone to only connect by Wifi. It worked! The doorbell connected.

Still not sure why the doorbell appeared "dead & unresponsive" yesterday, but lit up this morning. Could it have an internal battery the needed to be charged?

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

JamesC — Tue, 26 Nov 2019 16:21:41 GMT

Mjgraci89,

Thanks for letting us know you were able to resolve the issue. Please feel free to reach out to me directly if you have any further complications.

Thanks!

JamesC

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

brh — Wed, 27 Nov 2019 20:49:09 GMT

@Mjgraci89,

There is a battery inside the doorbell, just not one that the user can change out. If the battery is discharged, it may take 3 or more hours to recharge it.

Brian

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjgraci89 — Wed, 27 Nov 2019 21:03:13 GMT

Thanks Brian, great information. Makes sense. That’s what happened to me. I guess the internal battery was low enough that it discharged during the install.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Jsmitty66 — Thu, 28 Nov 2019 10:51:54 GMT

I turned off my breaker to test my connections so power was off at the doorbell only for a few moments. I received a low battery warning 15%.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

brh — Thu, 28 Nov 2019 13:18:18 GMT

@Jsmitty66,

That might have discharged a little faster than normal, but the charge on the battery does not last very long once the power is removed.

Brian

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjbeuke — Thu, 28 Nov 2019 15:00:51 GMT

What is the purpose of the battery? Is it just there to maintain WiFi, etc during quick power flashes?

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

acqflisu — Wed, 18 Dec 2019 09:10:13 GMT

I have been struggling to get the Arlo working. I had similar experience. After installation, it worked great for 30 minutes or less. I got the notice about low battery, then the camera was dead. I called tech support and they could not help me get it working and we determined it was a bad unit. I got a new one and the same thing happened. Although the voltage to the doorbell was good, I changed out the transformer because it was old and to get higher VA. No luck, cannot get any lights to turn back on. I have tried resetting, a hard reset pushing the reset and the doorbell button together, have uninstalled and reinstalled several times, nothing is working. Any suggestions??

I really like the features of Arlo, but may have to try something else.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjgraci89 — Wed, 18 Dec 2019 13:13:47 GMT

The one thing we did, that you didn’t mention, was to turn off the cellular connection on the phone. I did everything you’ve tried, but when I turned off the cellular & allowed my phone to only connect by WiFi, the system installed & has been working flawlessly since. Of course that suggestion isn’t or wasn’t in the documentation.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

acqflisu — Wed, 18 Dec 2019 14:58:05 GMT

I wish I could test that approach. I am getting no life from the unit. No lights at all to start any kind of synchronization. I am wondering if the doorbell battery gets too low it does not come back to life. That seems to be what is happening. It is getting 18v power consistently.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjgraci89 — Wed, 18 Dec 2019 15:07:39 GMT

I had that issue too. It had to “charge” overnight before it would connect. But it sounds like you were “wired” long enough to charge.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

dallasd — Wed, 18 Dec 2019 16:33:57 GMT

Set mine up yesterday. Worked initially, but like many of you, I got the low battery warning (9%). Later yesterday, the unit died...no life. Arlo, what’s the issue and how do we fix it?? Sounds like it is an issue for many folks!!

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

JamesC — Wed, 18 Dec 2019 17:24:52 GMT

For those with this issue, did you also set up the power kit that was included with your Arlo Video Doorbell? For more information, take a look here: How do I install the Power Kit for my Arlo Video Doorbell?

JamesC

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

acqflisu — Wed, 18 Dec 2019 17:31:09 GMT

Yes, installed the power kit. I have tried all the resetting methods recommended by tech support, in community discussions and in the documentation. The question I have is what to do now? Is there any hope for this unit? It is getting power but showing no signs of life. I have upgraded to a “transformer for video doorbells” and running out of options.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

dallasd — Wed, 18 Dec 2019 19:06:51 GMT

You say you “had” the issue. Did you get it fixed, and if so, how?

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

dallasd — Wed, 18 Dec 2019 19:09:27 GMT

James, yes, I did install the power kit. My unit worked great for a short period of time. The doorbell worked, it was videotaping and alerting me on my phone for movement. Then, it just stopped working. No lights...no life.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

Mjgraci89 — Wed, 18 Dec 2019 19:50:53 GMT

The “dead” video Doorbell remained wired (powered) overnight. The next morning the device was lit & responsive. I assume it charged its battery. At the top of this thread I detailed the steps the Arlo technician walked me through to connect the device. The only step different from what I did initially (when the install failed), was to shut off cellular access for my iPhone.

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

dallasd — Thu, 19 Dec 2019 00:27:57 GMT

Well, inexplicably my video doorbell spontaneously came to life today! Don’t understand it, but it’s now working fine. Praying it continues....

Re: ARLO Video Doorbell installed perfectly, but stopped working within 30 minutes.

acqflisu — Thu, 19 Dec 2019 00:43:37 GMT

Well, I am happy for you dallasd. I keep hoping for similar resurrection but it is not happening. Originally when I couldn’t figure it out I even had an electrician come out who checked power level and changed the transformer from an old one to a (cheap) new one. When that didn’t bring life to it, I got the better transformer. No reason it should not be lighting up.