topic Re: Arlo Ultra activity zone showing zoomed view in Arlo Ultra

Arlo Ultra activity zone showing zoomed view

berbmil — Sat, 14 Dec 2019 16:54:02 GMT

Not able to setup activity zone properly due to zoomed view when viewing activity zone setup.

activity zone viewcamera live view

Re: Arlo Ultra activity zone showing zoomed view

Timbukyou — Sat, 14 Dec 2019 20:05:13 GMT

Activity Zones only offer the upper left quadrant (25%) of the full picture to create a zone. I have reset both the cameras and the hubs. This shows up this way on my computer AND my cell phone so it has something to do with my Arlo account or the Arlo equipment.

Re: Arlo Ultra activity zone showing zoomed view

53Crusher — Sat, 14 Dec 2019 22:39:45 GMT

JamesC - You are the only person trying to help this community, I thank you for what you do, but this is a plea to you for help!

I was one of the very first owners of the Arlo Ultra system and am well versed in it and previous firmware updates/problems. This is my current system.

Base Station VMB500r4 Firmware 1.15.0.1_244_c345a43

4 Ultra Cameras H6 Firmware 1.070.50.0_197_09137a0

Audio Doorbell HW version 1.2 Firmware 1.2.0.0_309_283

Chime HW version 1.2 Firmware 1.2.0.0_297_266

Android Arlo App 2.12.0_26090 released 12/13/19

All cameras have constant AC power cables

The above is just to show that my $1500 Arlo Ultra system is completely up to date for firmware/software and is still completely non-functional. Although I did NOT want to spend 1/2 of my weekend troubleshooting Arlo equipment, I felt it was my duty to try and be part of the solution and not just complain. I did NOT want to go down this road, but I did.

Got out my ladder, physically removed all four Ultra cameras, audio doorbell and chime. Within the Arlo desktop app, I removed the chime, bell, four cameras and then base. Pressed sync button on chime 10 seconds to reset it. Pressed sync button on doorbell 10 seconds to reset it. Removed the batteries from all four cameras. Pressed reset on the base station for 10 seconds. Took the additional steps of deleting all video in my cloud storage library. Bought a brand new 64Gb SD card for the base station. Deleted the cache for my Arlo Android app and then deleted the app. Restarted cell phone and re-installed Arlo app.

At this point, I believe I had created the equivalent of a new out of box experience. Plugged Ethernet cable into my SmartHub and applied power. Light went to a solid blue. Used my newly installed Android app to add the SmartHub to my account. To be extra safe, I gave it a different name than before. Inserted brand new 64 GB SD card and reformatted with the Arlo Android app. One at a time, I installed the camera batteries and added them using my Android app. To be extra cautious, all cameras received a new name.

Finally, I added the audio doorbell (with new name), and associated it to a camera. Lastly, added the Arlo chime (with new name). All synced well and everything went as it should have.

Physically reinstalled all devices back to where they belong. Verified that I could do a "live view" on all cameras. Doorbell and Chime behaved as expected.

THIS IS WHERE I BELIEVE THE PROBLEM LIES.........

Tried to set up activity zones with my Android app as well as Desktop app. All four cameras are automatically zoomed to either the upper left 1/4 of the live view screen, or they are even zoomed into a 12"x 12" area in the upper left quadrant. There is no way for me to change this. As a result, I can NOT set an activity zone and they really only trigger when something happens in this small area.

Although Arlo hasn't paid me to be a beta tester for their system over the last year, that is EXACTLY what I have had to do to protect my $1500 investment. I REALLY hope you will forward this to your engineers. There is NOTHING I can do to make this better. The problem lies with the firmware update of 12/2. Instead of focusing on new features, Arlo should make sure that basic functionality exists first. I am starting to regret my purchase last year.

Certainly i could call tech support and let them take me through their pre-written scripts, but as you can see I have meticulously done what they would have me do and my system is still no better than a door stop. The problem lies with ARLO.

PLEASE LET ME KNOW WHAT TO DO!

Re: Arlo Ultra activity zone showing zoomed view

trevorns — Sun, 15 Dec 2019 05:51:37 GMT

I had same issue for 1 of 2 Ultra cameras and spent a couple hours with support. After trying everything (drop, add, reboots), we clicked the factory reset button on the base station then re-added the cams. Fixe the zoom issue for zones.

Hope that helps!

Re: Arlo Ultra activity zone showing zoomed view

berbmil — Sun, 15 Dec 2019 18:30:33 GMT

The reset of basestation fixed this; however, what a P.I.T.A. Had to re-pair all camera's, ie. get ladder remove camera from housing etc. etc.

Anyway

Thanks for the information

Re: Arlo Ultra activity zone showing zoomed view

Echostorm — Tue, 17 Dec 2019 07:42:29 GMT

I have the EXACT same issue, I have rebooted my hub, swapped cameras, my activity zone on my camera that is PVR enabled always goes to a top left zoomed in zone, then never triggers anymore! FIX THIS NETGEAR!

Re: Arlo Ultra activity zone showing zoomed view

Echostorm — Tue, 17 Dec 2019 07:44:12 GMT

This is not solved, resetting the base station does not fix this problem, it comes back!

Re: Arlo Ultra activity zone showing zoomed view

Echostorm — Tue, 17 Dec 2019 07:52:59 GMT

I have troubleshooted this to PVR enabled cameras. If you take the camera OFF the PVR (premium video recording plan) the whole image appears on activity screen, as soon as your place the camera in PVR the activity zone becomes zoomed in to the top left corner. This clearly is a server side issue that needs to be addressed!

Re: Arlo Ultra activity zone showing zoomed view

surfer1000 — Tue, 17 Dec 2019 11:46:13 GMT

I have the problem I don't have the plan...the last firmware update **bleep**ed up a lot of things with systems

Re: Arlo Ultra activity zone showing zoomed view

jprikios — Tue, 17 Dec 2019 16:31:30 GMT

This is hardly a solution considering the amount of time it would take to reset 10 cameras and 2 base stations considering other community members have stated this issue returns.

Re: Arlo Ultra activity zone showing zoomed view

berbmil — Tue, 17 Dec 2019 17:03:27 GMT

Basestation reset only worked until i setup "Arlo Smart" then activity zone reverted to 25% view. So no, did not fix the original problem. Seems to be related to "Arlo Smart" and change from PVR to "Smart Arlo". Seems the people who were early adopters are the ones used for fixing what should have been corrected before rolling out the crappy software.

Re: Arlo Ultra activity zone showing zoomed view

JamesC — Tue, 17 Dec 2019 19:46:38 GMT

The development team is currently investigating this issue. I will provide an update when I have more information.

JamesC

Re: Arlo Ultra activity zone showing zoomed view

Chimpboy — Wed, 18 Dec 2019 02:26:31 GMT

Hi James_C - Just so that you have a larger list of accounts to examine, I have the same issue with one camera working fine and the other two not. I will do a base station reset to see if that works.

Re: Arlo Ultra activity zone showing zoomed view

Chimpboy — Wed, 18 Dec 2019 04:11:38 GMT

The Base station reset worked. It did take two times to do it, but that fixed the view on the zone screen.

Re: Arlo Ultra activity zone showing zoomed view

53Crusher — Wed, 18 Dec 2019 12:07:07 GMT

New firmware 1.15.0.4_297_aa40f04 was pushed out to my base station last night! Still didn't fix the activity zone zoomed view issue for me................

Re: Arlo Ultra activity zone showing zoomed view

srandall25 — Wed, 18 Dec 2019 16:25:10 GMT

it will fix it initially, then it goes back to where it was before...

Re: Arlo Ultra activity zone showing zoomed view

srandall25 — Wed, 18 Dec 2019 16:27:34 GMT

Hello James,

Apparently a new firmware update was pushed out. It did not fix the zoomed in problem with activity zones... Not sure if it actually fixed the problem with the base station going offline or not. Are there any release notes for this release?

Re: Arlo Ultra activity zone showing zoomed view

JamesC — Wed, 18 Dec 2019 16:56:39 GMT

srandall25,

There is still another update coming to address the other issues. This update for the SmartHub addresses the crash issue that results in the SmartHub dropping offline. I will provide another update when the camera fixes are available.

JamesC

Re: Arlo Ultra activity zone showing zoomed view

srandall25 — Wed, 18 Dec 2019 17:09:37 GMT

Thanks for the update James. Where would one go to see the firmware release notes by version and date? Thank you.

Re: Arlo Ultra activity zone showing zoomed view

JamesC — Wed, 18 Dec 2019 18:21:43 GMT

srandall25,

Firmware release notes are available here: Firmware Release Notes

JamesC