topic Re: ULTRA+ in Arlo Ultra

Ultra SmartHub flashing orange

AUSTOM56 — Mon, 28 Oct 2019 16:41:42 GMT

Base station flashing orange How can I fix?

Re: ULTRA+

michaelkenward — Sat, 26 Oct 2019 14:35:55 GMT

What have you tried?

Reboot?

Power on/off?

Factory reset?

What do you see in the browser interface?

There should be a manual for this device here:

>>> User Manual <<<

Re: ULTRA+

TomMac — Sat, 26 Oct 2019 15:18:59 GMT

It happens on my Ultra base every now and then....

Key question is does the camera work?? Mine always does even if flashing amber.

I usu fix it by doing a restart in setting of base... ends up Blue but camera works the same.

Best thing is to move the Smarthub at least 12 ft from any other router ( need a longer cable tho )

Re: ULTRA+

brh — Sun, 27 Oct 2019 12:18:52 GMT

@AUSTOM56,

Also try temporarily moving the cameras closer to the hub and power cycle the hub to see if that fixes the problem. I enclosed my back porch and the signal strengths of a couple of cameras outside the porch dropped and now the hub blinks amber all the time. The cameras still work well though, even with the reduced signal strength.

Brian

Re: ULTRA+

michaelkenward — Tue, 29 Oct 2019 12:47:37 GMT

@TomMac wrote:

Key question is does the camera work?? Mine always does even if flashing amber.

This has been happening here for a week or so now.

The flashing orange light does not seem to affect the operation of the system.

Heaven only knows what is going on.

If I go in and do something, it will go blue for a bit, and then disco mode kicks in again.