topic Re: Arlo Ultra Activity Zone Does Not Function in Arlo Ultra

Arlo Ultra and Ignored Activity Zones

Goodoltom — Sat, 26 Jan 2019 02:17:41 GMT

Hey there!

I’ve looked at previous threads referring to what seems to be an issue for others around activity zones, but it seems that the suggestions don’t solve my issue.

The Problem: Excessive alerts and notifcations despite activity zones.

I’ve attached a photo of the Activity Zone along with a clip of a truck that’s clearly outside of the zone. In other posts, I’ve read that I need to use a different mode outside of the “Armed” mode which I’ve done. I’ve also turned off Vehicles and All Other Motion Smart Notifications which have resulted in the same issue.

Looking for any other suggestions

Re: Arlo Ultra and Ignored Activity Zones

jguerdat — Sat, 26 Jan 2019 14:46:24 GMT

Can't see the image until approved. Don't forget that vehicles can reflect a lot of the sun's IR which could be causing this to happen.

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Sun, 27 Jan 2019 02:10:30 GMT

Sure, but with vehicles and all other motion turned off I shouldnt have nearly as many notifications. Not to mention the small. activity zone.

Re: Arlo Ultra and Ignored Activity Zones

jguerdat — Sun, 27 Jan 2019 15:23:23 GMT

I've run into excess recordings with no apparent motion in my zone and I think the answer is that I was powering the camera so pixel detection was active. The PIR sensor wouldn't trigger but the pixel detection was. Unplugging the camera has calmed it down although more testing is needed to be sure. Is your camera AC powered?

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Tue, 29 Jan 2019 12:23:16 GMT

All cameras are working off battery.

Re: Arlo Ultra and Ignored Activity Zones

jguerdat — Tue, 29 Jan 2019 15:06:24 GMT

Since it appears that you're using Smart, what are the extra notifications being identified as in the library and are they correct?

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Tue, 29 Jan 2019 15:40:04 GMT

The only two boxes checked are people and animals. The library though shows motion, people and vehicles.

Re: Arlo Ultra and Ignored Activity Zones

jguerdat — Tue, 29 Jan 2019 19:27:24 GMT

Try changing the settings and then revert to what you want. You can also try disabling Smart on a camera and then reenable it. Last, try removing the camera from Settings, My Devices and resync.

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Tue, 29 Jan 2019 21:07:07 GMT

I thought to try that, but hadnt. That said, disabling smart and reenabling did mot solve the problem.

Re: Arlo Ultra and Ignored Activity Zones

PhylumT — Wed, 30 Jan 2019 21:42:38 GMT

Like you I have things turned off, such as Pets as my two dogs and neighbors dogs are constantly setting off cameras. They still set them off. I’ve also used zones to ignore areas, they also still record. Yes, they are listed as “pets” when recorded. I also noticed that it will capture a pet in the driveway but note it as “vehicle” because though the dog set it off it identifies my parked car.

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Sat, 02 Feb 2019 01:38:10 GMT

Seems like its an issue, maybe we can get someone to weight in with other suggestions. Getting 200+ notifications is fun and all, but it makes me consider just turning off the system

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Tue, 05 Feb 2019 01:41:10 GMT

Seems like this thread has died and I’m still left without a solution.

Re: Arlo Ultra and Ignored Activity Zones

st_shaw — Tue, 05 Feb 2019 03:17:06 GMT

All I see is a static image. It's not enough info to comment on what's happening. Can you post a video of the problematic behavior in action?

Re: Arlo Ultra and Ignored Activity Zones

JohnnyQT — Tue, 05 Feb 2019 15:16:50 GMT

I am also having issues with ignored activity zones. My specific case involves a camera pointed down my long driveway with a flag in view mounted on the garage. The camera is mounted at the corner of the garage looking straight down the driveway with the flag in view for almost a 1/8th of the screen. I've set up activty zones to pretty much just capture my driveway ignorning the flag. I've even made the activity zone smaller to ensure that the flag when waving in the wind doesn't hit it, but I still get hundreds of notifications all day. I just turned off notifications on that camera. I've tried resetting, remove battery, disconnect camera, etc. Pretty much everything. I don't think activity zones work. Keep in mind though that these cameras are being powered off of batteries since other accessories havent been released yet. Besides this minor issue all of my cameras have been working great...

Re: Arlo Ultra and Ignored Activity Zones

PhylumT — Wed, 06 Feb 2019 17:31:47 GMT

I am not sure what you’re asking to see in video or screenshot, the description of activity and what the user has done and expects are both listed. The issue he is experiencing is what many of us have... activity zones do not work, turning off Pet or Movement does not work.

Re: Arlo Ultra and Ignored Activity Zones

jguerdat — Wed, 06 Feb 2019 19:05:17 GMT

"A picture is worth 1000 words."

What you describe may be different from what we think you're saying. A video, with description, can make solutions occur faster, just as a quick phone call can beat 30 minutes of texting.

Re: Arlo Ultra and Ignored Activity Zones

PhylumT — Thu, 07 Feb 2019 18:17:01 GMT

Thread is not allowing me to attach screenshots.

Re: Arlo Ultra and Ignored Activity Zones

jguerdat — Thu, 07 Feb 2019 19:52:56 GMT

@PhylumT wrote:
Thread is not allowing me to attach screenshots.

I prefer to use the Choose File button below the text box since those images don't need to be approved as when you use the Photos icon above the text box.

Re: Arlo Ultra and Ignored Activity Zones

PhylumT — Thu, 07 Feb 2019 19:56:44 GMT

Using the “choose file” it’s the only visible way to add an image using my iPhone.

Re: Arlo Ultra and Ignored Activity Zones

Goodoltom — Sat, 09 Feb 2019 13:16:48 GMT

Seems that Arlo identified issues, pulling the Ultra product all together until they can find a firmware/ software that works. App update use came through, maybe a firmware is on the way.?