topic Arlo Q won't connect in Arlo Q

Arlo Q won't connect

behar — Tue, 08 May 2018 18:24:13 GMT

Arlo Q has been signed into on new network (new faster modem) but after set up was all complete it just sits and buffers and no camara action. Any ideas to resolve would be appreciated.

Re: Arlo Q won't connect

Streak2 — Tue, 08 May 2018 18:54:02 GMT

I had some weirdness with my Q. I deleted it from the app and then used a paperclip in the small reset button and re-installed from scratch. Everything now working perfectly.

Re: Arlo Q won't connect

bmtrain — Sun, 27 May 2018 01:22:48 GMT

Is the rest botton you use a paper clip to reset you arlo q on the camera or on the router?

Re: Arlo Q won't connect

Streak2 — Sun, 27 May 2018 01:37:53 GMT

Small hole on the side if the camera. Use a paperclip.
the reset button needs to be held in excess of 10 seconds. When the reset has been successful you will hear a "click" and the LED will then begin flashing amber after a short pause.

Re: Arlo Q won't connect

bmtrain — Sun, 27 May 2018 01:56:51 GMT

try to reset no luck. I get a messages that says unable to fine your arlo q. It also says to factory reset your arlo q. Is that what we try to do with the paper clip. This camera used to work I also have a 2nd arlo camera that does the same thing. I made some changes with my equipment but they both work first. I think I lost my wifi and vere since had problems,

Re: Arlo Q won't connect

jguerdat — Sun, 27 May 2018 13:26:53 GMT

When you used the reset button, did you also remove the camera from Settings, My Devices? That's likely needed, too.

Re: Arlo Q won't connect

bmtrain — Mon, 28 May 2018 00:19:16 GMT

Yes the camera was removed.

Is there away to check to see if these camera or the base station is running on 2.4 or 5 GHz?

Re: Arlo Q won't connect

Streak2 — Mon, 28 May 2018 04:23:58 GMT

What base are your referring to?

You can see what band the Q is on by logging into the back end of your router and checking the connected devices.