topic Re: Arlo Q will not complete setup in Arlo Q

Arlo Q will not complete setup

Cdrridg — Thu, 29 Sep 2016 22:59:39 GMT

I just received my Arlo Q - unboxed - went through the setup process - after scanning the QR code, it makes a razzberry like noise and goes back to blinking amber light - it won't connect - What's going on?

Re: Arlo Q will not complete setup

Cdrridg — Fri, 08 Jan 2016 00:01:58 GMT

Ah - capitalization on the network name is important apparently...got it working 🙂

Re: Arlo Q will not complete setup

JamesC — Fri, 08 Jan 2016 17:37:37 GMT

Cdrridg,

Yes, the SSID and password information is case sensitive. I am glad to hear you resolved the issue!

JamesC

Re: Arlo Q will not complete setup

Ebeck — Thu, 21 Jan 2016 23:39:38 GMT

I'm having the same issue and I ensured PW was typed in correctly.... Help

Re: Arlo Q will not complete setup

Ebeck — Thu, 21 Jan 2016 23:41:23 GMT

Having same issue.. Help!

Re: Arlo Q will not complete setup

jguerdat — Fri, 22 Jan 2016 13:29:12 GMT

Try a reset on the camera via the reset button. Maybe...

Re: Arlo Q will not complete setup

JamesC — Fri, 22 Jan 2016 16:18:12 GMT

Ebeck,

Please let us know if a factory reset solves the issue. As jguerdat says above, hold the reset button down for 20-30 seconds until you hear a click sound. The camera will reboot and try again to claim the Arlo Q on your account.

JamesC

Re: Arlo Q will not complete setup

Ebeck — Fri, 22 Jan 2016 17:37:40 GMT

Did not work...

Re: Arlo Q will not complete setup

Cdrridg — Fri, 22 Jan 2016 18:19:43 GMT

Not just the password - the network name is case sensitive - you must put it in EXACTLY as it shows up.

Re: Arlo Q will not complete setup

Ebeck — Sat, 23 Jan 2016 00:27:53 GMT

It finally connected after 5 mins, but now it's off line.. Please advise?

Re: Arlo Q will not complete setup

JamesC — Mon, 25 Jan 2016 17:21:09 GMT

Ebeck,

What is the behavior of the LED on the camera? If the camera is too far from your router, or the signal is too weak, it will struggle to maintain a connection. Bring the camera close to the router to see if it comes back online.

Please let us know!

JamesC

Re: Arlo Q will not complete setup

JustinJabara — Mon, 01 Feb 2016 21:27:06 GMT

I'm having all the same issues as previously mentioned. I have checked my password and network id for capilatizaion errors. It originally connected and then immediately went off line. It was sitting within 1 ft of the router. The light just did a slow "blue blink".

Next step: I removed the device from my account and attempted the setup all over again. Now the unit will not connect at all. Any ideas????

Re: Arlo Q will not complete setup

JamesC — Thu, 04 Feb 2016 19:00:02 GMT

JustinJabara,

Consider a factory reset of the Arlo Q by pressing and holding the reset button for 20-30 seconds until you hear a click. After the camera reboots try going through setup again.

JamesC

Re: Arlo Q will not complete setup

JustinJabara — Thu, 04 Feb 2016 11:56:59 GMT

Hi JamesC.

I have performed the factory reset about 10 times with no success. The same issue is still occuring. Any other ideas?

Re: Arlo Q will not complete setup

jguerdat — Thu, 04 Feb 2016 14:48:42 GMT

If ensuring that the SSID and passphrase are entered properly, INCLUDING ANY CAPS, I'd open a trouble ticket. You may just have a bad camera. You could also try replacing it from the place you purchased it from.

Re: Arlo Q will not complete setup

22LSC — Thu, 04 Feb 2016 15:00:36 GMT

I am having all of the above same issues. Now they are telling me that I need to remove all security from my router for setup, then install and reinstall security. So far this hasn't worked. I am using a D-Link router. I also have a 5 camera system that works perfectly. I would like to have 2 Arlo Q's, but ONLY if I can get the first one working...

Re: Arlo Q will not complete setup

calete — Thu, 04 Feb 2016 21:23:51 GMT

Have reset password 20 times and I know my password is correct. WHAT a waste of money FTC time

Re: Arlo Q will not complete setup

calete — Thu, 04 Feb 2016 21:29:09 GMT

I spent my hard earned money on this product and it hasn't worked day one. It's only right to refund in full

Re: Arlo Q will not complete setup

JamesC — Fri, 05 Feb 2016 17:26:21 GMT

JustinJabara,

Consider contacting the Arlo Support Team for further investigation of this issue. You will find several options for contacting support in the provided link.

22LSC, calete

Does your SSID contain any special characters? What is the behavior of the LED indicator when trying to sync your Arlo Q? Does it make any sounds after scanning the QR code?

Please let us know so we can further assist!

JamesC

Re: Arlo Q will not complete setup

Obomc72 — Mon, 14 Mar 2016 05:13:09 GMT

was trying to add an Arlo Q camera to my existing wireless camera in the same room. The range for motion detection is 15ft and it did not provide sound... So I bought the Arlo Q and mounted it in the same room, closer to the subject (my sleeping father) so that I can detect when he gets out of bed ( at risk for falls). I use my Apple I-phone 6-plus with the iOS App... The wireless Arlo camera is working perfectly! ...so then I go through the steps to add the Arlo Q, the screen comes up with the network name/password and the network name is auto-filled, all capital letters & no special characters, I put in the password, get the screen code & the "chime"... Wait for connect with blinking blue light... But then I get the "Buzzer" & it goes back to blinking Amber! I tried the reset button TWICE, till it ""clicked"and went through it all again, and it does the same thing. If my password ends in a special character, is that enough to make it fail??