topic Options to set max battery charge level in App for alwasys connected unit. in Arlo Pro 5S 2K

Options to set max battery charge level in App for alwasys connected unit.

dhung — Sat, 02 May 2026 06:02:00 GMT

I am requesting a feature that allows users to set a maximum battery charge threshold (e.g., 50% or 80%) for cameras that are permanently connected to an AC power source or solar panel.

The Problem:
Lithium-ion batteries experience accelerated wear and potential swelling when maintained at a 100% charge state for extended periods. Since the Arlo Pro 5S 2K requires a battery to be physically inserted to operate—even when on AC power—users cannot simply remove the battery to preserve its lifespan. Currently, the camera keeps the battery at 100% indefinitely, which will inevitably lead to premature battery failure.

Proposed Solution:
Add a toggle in the Device Settings called "Battery Health Mode" or "Stationary Power Mode."

When enabled, the camera would stop charging once the battery reaches a user-defined or pre-set limit (ideally 50-60% or 80%).
The camera would then run off AC power, only drawing from the battery if the AC source is disconnected.

Benefits:

Longevity: Significantly extends the physical life of the battery.
Safety: Reduces the risk of battery swelling/bloating.
Sustainability: Reduces the frequency of battery replacements and electronic waste

Re: Options to set max battery charge level in App for alwasys connected unit.

DannyBearAgain — Sat, 02 May 2026 06:43:02 GMT

I recall an earlier discussion on this a few years ago.

Arlo cameras only charge the battery to 80% capacity to maximise operating life although the Arlo app's battery status says 100%.

The stand alone Arlo battery charger unit will charge the battery to the full 100% capacity so it not recommended to leave them on charge when they are fully charged.

https://kb.arlo.com/1179176/What-do-the-Arlo-camera-battery-level-icons-and-notifications-mean

Re: Options to set max battery charge level in App for alwasys connected unit.

ShayneS — Tue, 05 May 2026 20:54:35 GMT

Thank you for your feedback, we greatly appreciate the community’s contribution. I will provide this information to the appropriate team for future consideration.

Re: Options to set max battery charge level in App for alwasys connected unit.

jguerdat — Wed, 06 May 2026 13:21:31 GMT

@DannyBearAgain wrote:

I recall an earlier discussion on this a few years ago.

Arlo cameras only charge the battery to 80% capacity to maximise operating life although the Arlo app's battery status says 100%.

To be clear, since both @TomMac and I were involved at that point, this was true of the Pro and Pro 2 batteries. I have never heard nor been told that newer camera batteries charge this way although it would seem to be the correct way to do so.

Re: Options to set max battery charge level in App for alwasys connected unit.

StephenB — Wed, 06 May 2026 15:06:51 GMT

@jguerdat wrote:
To be clear, since both @TomMac and I were involved at that point, this was true of the Pro and Pro 2 batteries. I have never heard nor been told that newer camera batteries charge this way although it would seem to be the correct way to do so.

We've also been told many times that there is overcharge protection, so it is ok to leave the cameras connected to AC power 24x7.

That said, I think it would be useful to have some more battery-related features. It'd be good if you could see in the app the charge level needed for the cameras to resume charging. Also an estimate on the amount of time before the battery would need to be recharged.