topic Re: Arlo PRO 4 image was clear and is now pixelated in Arlo Pro 4

Arlo PRO 4 image was clear and is now pixelated

kevinh2003 — Wed, 26 Apr 2023 18:03:52 GMT

Set up Arlo Pro 4 at bird feeder a couple of weeks ago. Initial image was very clear. A couple days ago the image became very pixelated with poor resolution. I cleaned the lenses and camera face an nothing improved. Set up a second camera today and it is also very low resolution. I have selected the battery power option for highest quality video.

Re: Arlo PRO 4 image was clear and is now pixelated

jguerdat — Sun, 23 Apr 2023 13:45:00 GMT

That usually implies a signal strength and/or quality issue. If you bring the camera closer to your router or hub does the issue go away? You may need to move your hub (if you use one) for a better connection or a WiFi extender that's closer to the cameras to fix this.

Re: Arlo PRO 4 image was clear and is now pixelated

kevinh2003 — Sun, 23 Apr 2023 13:54:55 GMT

Same poor quality image with the camera within 5 ft of router.

Re: Arlo PRO 4 image was clear and is now pixelated

StephenB — Sun, 23 Apr 2023 19:42:29 GMT

@kevinh2003 wrote:

Same poor quality image with the camera within 5 ft of router.

Can you post a sample?

Re: Arlo PRO 4 image was clear and is now pixelated

kevinh2003 — Mon, 24 Apr 2023 11:53:30 GMT

Re: Arlo PRO 4 image was clear and is now pixelated

kevinh2003 — Mon, 24 Apr 2023 11:54:50 GMT

To photo is current setup, bottom photo is screen shot of a video from 4/7.

You can see the pixelation change in the two photos from the brown feeder at the back of the shot.

Re: Arlo PRO 4 image was clear and is now pixelated

StephenB — Mon, 24 Apr 2023 12:25:18 GMT

@kevinh2003 wrote:

To photo is current setup, bottom photo is screen shot of a video from 4/7.

You can see the pixelation change in the two photos from the brown feeder at the back of the shot.

Thx. I'd describe the top image as blurry/lacking detail (for me pixelated is something different) - but whatever you call it, certainly a lot lower quality. The bird bath is particularly striking.

Does removing/reinserting the camera battery bring the quality back to something like the original?

Also, the camera position looks a bit different. The one on the top has noticably less sky, so more ground detail at the bottom. That would make the video a bit harder to encode. Did you move the camera, or did you adjust the field of view in the video settings???

Re: Arlo PRO 4 image was clear and is now pixelated

kevinh2003 — Mon, 24 Apr 2023 12:59:03 GMT

Thanks - I have tried lots of stuff including the following:

Shut camera off and restart

Remove battery and replace battery

Replace camera with a new out of the box camera and battery

Poor resolution image appears regardless of camera angle - I am sure it changed as part of my activities

Poor resolution image appears inside the house close to the router as well as outside.

It really seems that something changed. Is it possible a firmware update or something on my subscription affected resolution?

Re: Arlo PRO 4 image was clear and is now pixelated

StephenB — Mon, 24 Apr 2023 13:44:30 GMT

@kevinh2003 wrote:
It really seems that something changed. Is it possible a firmware update or something on my subscription affected resolution?

The subscription wouldn't matter. Hard to rule out a firmware update - in the past bugs there have sometimes resulted in lower quality.

If you enabled auto zoom & track, then the video is 1080p, so lower quality than 2K. So perhaps check that. Also go into the video settings, and make sure the camera is fully zoomed out.

Signal quality could also be a factor, but usually that shows up as loss - which is not what you are seeing.

FWIW, part of the puzzle here is that Arlo insists on recording at a quite low bitrate. Even your bottom sample has blurred out details in places. Personally I'd like to have a setting to trade retention for quality. For example, 3x the bitrate with 10 day retention instead of 30 days.

Re: Arlo PRO 4 image was clear and is now pixelated

Mammoth670 — Thu, 27 Apr 2023 09:06:03 GMT

Since the last firmware update all 4 of my arlo 4's playback recordings are absolutely terrible

that firmware update needs to be reviewed asap

id made no changes on my part they have worked well for over a year. Now recordings are blurry

Re: Arlo PRO 4 image was clear and is now pixelated

ShayneS — Mon, 01 May 2023 18:21:22 GMT

HI @Mammoth670

May I ask which troubleshooting steps you have performed so far? I don't want to suggest anything you have previously performed.

Re: Arlo PRO 4 image was clear and is now pixelated

kevinh2003 — Mon, 01 May 2023 18:28:17 GMT

Thanks - I have tried lots of stuff including the following:

Shut camera off and restart

Remove battery and replace battery

Replace camera with a new out of the box camera and battery

Poor resolution image appears regardless of camera angle - I am sure it changed as part of my activities

Poor resolution image appears inside the house close to the router as well as outside.I’m

Re: Arlo PRO 4 image was clear and is now pixelated

Mammoth670 — Mon, 01 May 2023 18:46:05 GMT

i have tried 3 different wireless access points. UI. Flex HD, Flex Nano, and AC LR. on 2.4 ghz static wireless channels with the least interference. they all have over 75% signal.

swapped batteries (means power cycling the cameras entire)

i've tried different default light settings

i've changed recording times from 1 minute. to detection only

no matter what i change. the playback video is now entirely distorted and blurry... since the last firmware update

Re: Arlo PRO 4 image was clear and is now pixelated

ShayneS — Mon, 01 May 2023 19:02:37 GMT

Is this with the library videos and live streaming? Does it occur on the web portal as well? Do you have any screenshots of the pixelation that you can share?

Re: Arlo PRO 4 image was clear and is now pixelated

Mammoth670 — Mon, 01 May 2023 20:09:09 GMT

to be honest from the web portal I can't find a way to zoom in / maximize. from what I can tell Yes it still gets pixelated. I am using a MacBook Pro using Safari browser..

I have donated (with in the app) a half dozen of these. and of the chirping I experience. would that not be enough to see the issues?

Re: Arlo PRO 4 image was clear and is now pixelated

ShayneS — Wed, 03 May 2023 18:05:52 GMT

@Mammoth670

If you could PM me with a screenshot that would work too.

Re: Arlo PRO 4 image was clear and is now pixelated

ShayneS — Mon, 01 May 2023 23:51:16 GMT

Thank you, I provided the videos and notified the team. I will provide another update as soon as possible.

Pro 4 video issues pixelated

Bjohnson6626 — Thu, 04 May 2023 16:53:05 GMT

when I go to view my cameras, the video is distorted in all my cameras. This just started happening, they were fine when I installed them 6 months ago. I have checked for firmware updates but none are available. The signal strength is very strong on all 3 cameras. Any idea what is causing the distortion?

Re: arlo pro 4 video issues

jguerdat — Thu, 04 May 2023 14:20:51 GMT

Are they connected to your WiFi or to a base/hub? If to WiFi, are you using a mesh network or just a normal router? Have you tried rebooting the router or base/hub? Have you tried bringing a camera closer to the router or base/hub to see what happens?

Re: arlo pro 4 video issues

ShayneS — Thu, 04 May 2023 16:53:34 GMT

Are you able to provide a screenshot of the image quality?