topic Re: Only first action firing in mode rules in Arlo Pro 4

Only first action firing in mode rules

CDRK — Wed, 11 Jan 2023 16:24:29 GMT

I have a mode created that if there is motion detected on one camera, then it should record video on that camera plus record video on a second camera. Current rule is if motion detected on camera 1, then do the following: camera 1 record video and camera 2 record video. The rule has worked for several years but starting yesterday the second camera no longer triggers to record, only camera 1 is recording. I have tested by adding other devices with the "Add Device" but the additional recordings are not being triggered. I have another rule that says if motion is detected on camera 2, then camera 2 record and that rule woks fine. Is there a recent change that is affecting all rules being triggered?

Re: Only first action firing in mode rules

jguerdat — Thu, 12 Jan 2023 14:48:33 GMT

While that's certainly possible, try rebooting your hub or base as well as reinserting the batteries in all cameras to get back to a known state.

Re: Only first action firing in mode rules

CDRK — Thu, 12 Jan 2023 23:01:30 GMT

Yes, re-started everything, but still not triggering recording on second camera (the additional rule in the mode). This all started happening after I upgraded my cameras form Arlo Pro to Arlo Pro 4. Currently have a case open with Arlo, sent them further details yesterday and waiting for update.