https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810805#M7418 The hub keeps going from solid blue to flashing amber. The cameras are indoors cause it was to cold outside and was getting low temp warning. I think the hub is losing connection with the cameras but not sure. Fri, 12 Feb 2021 07:15:42 GMT Derek74 2021-02-12T07:15:42Z https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810805#M7418 The hub keeps going from solid blue to flashing amber. The cameras are indoors cause it was to cold outside and was getting low temp warning. I think the hub is losing connection with the cameras but not sure. Fri, 12 Feb 2021 07:15:42 GMT https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810805#M7418 Derek74 2021-02-12T07:15:42Z https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810834#M7422 <P>That sounds very much like a connection problem with at least one camera. Try moving one at a time to see if you can figure out which one is causing this.</P> Fri, 12 Feb 2021 14:37:50 GMT https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810834#M7422 jguerdat 2021-02-12T14:37:50Z https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810837#M7424 <P>Had this happening due to range of camera, fix was to move the hub away from my router by 10ft cable and issue was solved.</P> Fri, 12 Feb 2021 14:43:54 GMT https://community.arlo.com/t5/Arlo-Pro-3/Flashing-amber/m-p/1810837#M7424 TomMac 2021-02-12T14:43:54Z