topic Re: Two cameras synced perfectly. Third camera will not sync. in Arlo Pro 2

Two cameras synced perfectly. Third camera will not sync.

Overlookgoldens — Sun, 22 Apr 2018 18:50:36 GMT

I bought three cameras and one home base as a set. Two cameras are perfect. I didn’t set the third one up, but decided to finally do it. The third camera will not sync at all. No lights, nothing. I know the battery is fine because I exchanged it from one of the fully charged working cameras.

‘Any ideas?

thanks,

bob

Re: Two cameras synced perfectly. Third camera will not sync.

Arlo123 — Sun, 22 Apr 2018 20:25:59 GMT

Try to powercycle your base first before syncing the 3rd camera. Let your base be unplugged form outlet for about a minute. After you powercycle it, try removing the batteries of the camera for 5 seconds then re-insert it. Then sync the camera to the base by pressing the sync button on the base for 2 seconds, theny press sync on camera for 2 seconds. It works for me.

🙂

Re: Two cameras synced perfectly. Third camera will not sync.

jguerdat — Sun, 22 Apr 2018 21:52:06 GMT

Also, when you first install the battery, verify that the blue LED flashes briefly to indicate power. If that doesn't happen, nothing will work.

I would also recommend NOT holding the base sync button for 2 seconds but just press it briefly. 2 seconds may be ok but too long causes an issue.