https://community.arlo.com/t5/Arlo-Pro-2/Unable-to-connect-my-Pro-2-to-internet-or-Base-Station-Pressed/m-p/1834909#M51532 <P>The Pro2 will only connect to a base unit ( not internet )...</P> <P>The normal procedure to reset the camera is pull the battery and then replace.</P> <P>Since you have been unable to connect the camera to them I recommend a full reset of the base.</P> <P>&nbsp;</P> <P>Remove the base from app/prgm, use remove device.</P> <P>Hold in the reset ( you may need a paperclip ) till the leds start to flash... let it reset and reboot about1-2 mins and then reclaim the base as if it is a new setup in app/prgm</P> <P>Make sure that base is as far away from you router as the cable reaches.</P> <P>A direct way to sync is push the sync button on base and then the camera ( while about 3 ft away )</P> <P>A slow blinking blue led on camera to fast means it worked.</P> <P>check on app/ prgm</P> Thu, 07 Oct 2021 12:52:30 GMT TomMac 2021-10-07T12:52:30Z https://community.arlo.com/t5/Arlo-Pro-2/Unable-to-connect-my-Pro-2-to-internet-or-Base-Station-Pressed/m-p/1834889#M51531 <P>I can not connect my Arlo Pro 2 camera to the internet or the base station. The battery is charged . I have pressed the sync button several times but nothing helps. I just get no response from the camera. Is there perhaps someone can please tell me what to do? Thanks</P> Thu, 07 Oct 2021 15:34:45 GMT https://community.arlo.com/t5/Arlo-Pro-2/Unable-to-connect-my-Pro-2-to-internet-or-Base-Station-Pressed/m-p/1834889#M51531 JP_Cutman 2021-10-07T15:34:45Z https://community.arlo.com/t5/Arlo-Pro-2/Unable-to-connect-my-Pro-2-to-internet-or-Base-Station-Pressed/m-p/1834909#M51532 <P>The Pro2 will only connect to a base unit ( not internet )...</P> <P>The normal procedure to reset the camera is pull the battery and then replace.</P> <P>Since you have been unable to connect the camera to them I recommend a full reset of the base.</P> <P>&nbsp;</P> <P>Remove the base from app/prgm, use remove device.</P> <P>Hold in the reset ( you may need a paperclip ) till the leds start to flash... let it reset and reboot about1-2 mins and then reclaim the base as if it is a new setup in app/prgm</P> <P>Make sure that base is as far away from you router as the cable reaches.</P> <P>A direct way to sync is push the sync button on base and then the camera ( while about 3 ft away )</P> <P>A slow blinking blue led on camera to fast means it worked.</P> <P>check on app/ prgm</P> Thu, 07 Oct 2021 12:52:30 GMT https://community.arlo.com/t5/Arlo-Pro-2/Unable-to-connect-my-Pro-2-to-internet-or-Base-Station-Pressed/m-p/1834909#M51532 TomMac 2021-10-07T12:52:30Z