topic Video settings recording area affect motion detection? Getting too many false notifications. in Arlo Pro 2

Video settings recording area affect motion detection? Getting too many false notifications.

BarryLL — Mon, 09 Nov 2020 16:07:49 GMT

Does changing the recording area in video settings, affect motion detection? I'm hoping it will, I get too many false hits, but if I reduce sensitivity, I'll miss what I really want!

I'm asking because it does not appear to. Also took me awhile to realize that motion sensitivity in the Device Utilities - Motion Detection Test wasn't doing anything, have to change that stuff in the Mode - Armed - Rules!

Re: Video settings recording area affect motion detection?

jguerdat — Sat, 07 Nov 2020 15:09:08 GMT

Changing the video zoom has no effect on detection. This is because the zoom is a digital cropping of the video sensor while the PIR sensor, which is separate, has no capability of being cropped.

Your best bet may be to reposition the camera to eliminate the source of the false triggers. An Arlo Smart subscription could be useful since it would allow the use of zones to reduce notifications.

Re: Video settings recording area affect motion detection?

BarryLL — Mon, 09 Nov 2020 16:08:31 GMT

That's just the tech details I needed and suspected . Unfortunately the camera placement is limited due to the need to access to recharge battery. I didn't realize I could get cloud activity zones, even with battery, by using Arlo Smart, I'll have to think about that. Meanwhile I've reduced sensitivity, but far I've also lost some wanted notifications. Thanks!