topic Re: Mode with 1 camera NOT detecting motion in Arlo Pro 2

Mode with 1 camera NOT detecting motion

Tandemrx — Tue, 09 Jan 2018 19:09:20 GMT

4 camera set up. Trying to add a mode where 3 cameras detect motion & audo & push alerts while 4th camera has motion/audio detection turned off. Do I do this with just not including the 4th camera in the rules? One you add rule for camera it doesn't seem to let you unclick motion detection (if you don't have a trigger it won't let you save rule).

Re: Mode with 1 camera NOT detecting motion

TomMac — Tue, 09 Jan 2018 19:20:11 GMT

hints;

Only ONE mode can run at a time

Any camera NOT in the active Mode is off

Add a mode fro the three cameras... First add the first camera, then settings , then save

Go back and edit the same new mode to add the second and then third camera.

If you want all cameras active but no alerts from the forth, then just edit your current mode to turn off alerts for that camera

Re: Mode with 1 camera NOT detecting motion

steve_t — Wed, 10 Jan 2018 09:08:06 GMT

Correct. The 4th camera doesn't get a rule in the mode you make and it'll sit there and only be available to live viewing. Motion or audio will not activate this camera