https://community.arlo.com/t5/Arlo-Pro-2/Arlo-Pro-2-Materials/m-p/1770746#M43629 <P>Looks and feels like ABS [Acrylonitrile butadiene styrene] for the case, and probably acrylic for the face material in front of the lenses. These are typical for such applications.</P> <P>This is an educated guess only, based on my 40 years of employment in the injection molding industry.&nbsp;</P> Sat, 09 May 2020 15:31:32 GMT Reallyconfused 2020-05-09T15:31:32Z https://community.arlo.com/t5/Arlo-Pro-2/Arlo-Pro-2-Materials/m-p/1770234#M43553 <P>Hi,&nbsp;<BR />I am looking to find the materials of the following Arlo Pro 2 components:</P> <P>VMC4030P Camera</P> <UL> <LI>Casing</LI> <LI>Screen</LI> </UL> <P>VMA1300 Wall Mount</P> <P>If you could assist on the type of plastic these are made from that would be great. Thank you.</P> <P>&nbsp;</P> Thu, 07 May 2020 01:23:51 GMT https://community.arlo.com/t5/Arlo-Pro-2/Arlo-Pro-2-Materials/m-p/1770234#M43553 jinmei 2020-05-07T01:23:51Z https://community.arlo.com/t5/Arlo-Pro-2/Arlo-Pro-2-Materials/m-p/1770746#M43629 <P>Looks and feels like ABS [Acrylonitrile butadiene styrene] for the case, and probably acrylic for the face material in front of the lenses. These are typical for such applications.</P> <P>This is an educated guess only, based on my 40 years of employment in the injection molding industry.&nbsp;</P> Sat, 09 May 2020 15:31:32 GMT https://community.arlo.com/t5/Arlo-Pro-2/Arlo-Pro-2-Materials/m-p/1770746#M43629 Reallyconfused 2020-05-09T15:31:32Z