topic Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post. in Arlo Pro 2

Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

LordRegis — Thu, 02 May 2019 18:24:08 GMT

I have CVR on an arlo Pro 2.

There are frequently gaps in recording the video represented by black space.

Some of these appear to playback the video anyway, but only if the playhead is set before those areas and plays. Setting the playhead TO the actual black area just causes continual loading.

More recently the video has actually cut altogether. This happened during motion of someone looking in to my window; the camera went offline! and then back online once they had left.

Frequently during MOTION the camera acts up. The camera was set as the doorbell camera AND to record based on a trigger from an action zone. Does the recording due to an action zone or doorbell prevent the CVR recording in the background? That's what appears to be happeneing at random.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

LordRegis — Thu, 02 May 2019 18:24:19 GMT

In continuation from my original post. See the images below.

1) showing that there are black gaps in the video timeline. These often coincide with motion as indicated by green bars, although in my experience the green bars appear when there is no action and sometimes don't appear when there is motion.

2) showing that again, the video went black duuring a green bar section. Also, the video above the timeline is black because I placed the playhead over this area. HOWEVER if I place the playhead before the black area abd let us play, sometimes the area shown as black will actually play as normal when the playead gets there. It just cannot be started in the black area.

Basically it's buggy and unreliable which is not ideal for home security, espeically a costly one.

Re: Improve timeline

JessicaP — Thu, 02 May 2019 22:47:37 GMT

Hi @LordRegis,

Our development team is aware where some users are experiencing some gaps in CVR timeline for Arlo Pro 2 and is looking into this issue. We will update the community when we hear more information. We appreciate your patience and understanding regarding this.

Re: Arlo CVR playback turns black after few seconds

DB67 — Tue, 14 May 2019 16:28:29 GMT

I am having this exact same issue where the CVR playback turns black after a couple of seconds on the Arlo Q. I just subscribed to the CVR plan a couple days ago and have not been able to get it to playback correctly yet. I am also using iOS. I have not downloaded iOS 12.3 yet. I have also purchased 4 Arlo Ultra cameras and have pre-ordered the 25' outdoor charging cables. I was planning on ordering the CVR for these 4 cameras as well when I get the charging cords, but having second thoughts now. Any help or information would be greatly appreciated.

Re: Arlo CVR playback turns black after few seconds

AA03 — Sun, 23 Jun 2019 01:22:08 GMT

I have been having the same problem with intermittent blackouts in the CVR recording playback. It’s very annoying. Any fix yet, Arlo tech support?

Re: Arlo CVR playback turns black after few seconds

jayhova1 — Mon, 24 Jun 2019 02:08:07 GMT

I have also been having issues with CVR on 3x cameras ever since I bought them 6 months ago. Timeline jumps around, video not viewable or missing. I have tried multuple browsers and an up to date iPhone. All platforms have the same issue viewing saved video from my camears. It cannot be reliabliy brought up for viewing most of the time. Not to mention even if I could there is no way to save clips off and there are no timestamps readily displayed on the video.

I already invested a lot in this Arlo system and have been really hoping they would fix these issues. Very disappointed and am seriously considering taking the loss and trying something else...

CVR drop outs

Raggyman55 — Mon, 01 Jul 2019 20:57:41 GMT

When will fix be available for the CVR drop out issues. Cameras that fail to record, whats the point!!!!!!not happy. Won,t buy any more till fix is issued. Won,t be prompoting or recommending either. This fix is fundermental to the integrity of the system, you must realise this and put all efforts in to putting it right...

Re: CVR drop outs

Mjbeuke — Mon, 01 Jul 2019 21:50:50 GMT

This is just like everything else Arlo does..... Here are the steps:

1) Roll our firmware "updates" that users have no choice in - and generally screw up 1-3 functions of the useability of these "security" cameras

2) Users report issues - Arlo apologizes and says they are working to resolve the issue with engineers

3) Nothing happens for months (like this 6+ month old thread) - and people are still paying for these non-existent services with no actual fix/resolution to speak of

This company is doomed. You all are wasting your time thinking this will ever be the "security" system you invested heavily in - to find it provides no security at all. Completely unreliable.

Sorry to bear the bad news kids

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

Abby11 — Fri, 27 Sep 2019 02:51:33 GMT

I'm having the same problem. Today, there was one gap of about 3 hours along with several smaller gaps in my video for one camera. Very frustrating when I feel like I'm not getting what I'm paying for. It does seem related to motion detection. I've also wondered if it could be related to multiple cameras picking up motion at the same time. Sometimes it seems like it could be occurring when an outside camera detects motion at the same time as an inside camera. The video also isn't as high quality as I would like and the motion detection doesn't always seem to work very well especially outside.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

StephenB — Fri, 27 Sep 2019 10:26:30 GMT

@Abby11 wrote:
I'm having the same problem. Today, there was one gap of about 3 hours along with several smaller gaps in my video for one camera. I've also wondered if it could be related to multiple cameras picking up motion at the same time.

How many cameras are connected to the base station? Also, how far is the CVR camera from the base?

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

Abby11 — Sat, 28 Sep 2019 02:28:16 GMT

There are usually 4 cameras connected to the base station. 3 of them currently have cvr. The CVR cameras are 30-50ft from the base and probably 30-60' from each other. WiFi signal is very strong at each of them. None are particular close to other electronics. I have the problem with all of them.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

jace88 — Fri, 18 Oct 2019 11:38:28 GMT

I'm in the same boat where CVR works on my two Arlo Pro 2 cameras very intermittently if at all - I needed it today for when I had contractors in but that's when it blacked out. Tried troubleshooting, restarting the hub, etc... seemed to work initially but stopped already. Before anyone does ask the generic questions, they're all within 10m of the hub, great connection, all powered fine, etc...

I'm actually asking for a refund now since it's never actually worked.

It's funny that the free bit of recording motion video/pictures works great, but the paid subscription doesn't. Go figure.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

StephenB — Fri, 18 Oct 2019 14:12:00 GMT

@jace88 wrote:

I'm in the same boat where CVR works on my two Arlo Pro 2 cameras very intermittently if at all - I needed it today for when I had contractors in but that's when it blacked out.

If it's always been intermittent, then of course you should cancel/ask for a refund.

The contractor's work might have interfered though - power tools do create electrical noise (e.g., wifi interference). They could also have unplugged the cameras if they needed an outlet.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

jace88 — Sat, 19 Oct 2019 13:35:39 GMT

It has been intermittent since the beginning and I've tried all the troubleshooting the Arlo support team offered me - just feels like I'm beta testing something and paying for the privilege.

I also did consider if the contractors impacted it but given they were installing an AC outside, and the Arlo Pro 2 cameras are all wired permanently through other outlets/circuits and the CVR was totally blank for the whole of the day (according to the app/website) I just gave up. I'm thinking of going back to my old IP cameras and Synology NAS for 24/7 recording, and just using the Arlos for easy remote admin, alerts and the baby camera.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

Netvuk — Wed, 30 Oct 2019 23:52:25 GMT

I have an idea on this matter and something I’m going to try later. As CVR is now available (only got it turned on today) I’m going to try not recording a clip on motion detection, ie setting the camera NOT to record on motion detection. I have a hunch that this system can’t do CVR and motion clips. If anyone else can try too we may have the answer.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

jace88 — Thu, 31 Oct 2019 01:25:25 GMT

Interesting. It should work given the CVR timeline feature deliberately shows you colour bands to indicate if there was an event triggered but I wouldn't be surprised if it was causing the Arlo to be overloaded or something. Either way, seems flawed.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

Netvuk — Thu, 31 Oct 2019 09:48:33 GMT

It seems that I might be right.

I have 3 Pro 2 cameras. I have subscribed to Smart Notifications, then yesterday I put 2 cameras on CVR. I noticed like a few of you that I was getting gaps in the CVR video at very inappropriate times, just after motion detection.

I have now stopped the 2 CVR cameras recording on motion. I still get a notification but not a smart notification as the camera needs to record on motion detection for smart notifications to work.

I don’t get any missing CVR video now, especially at the crucial point of motion detection.

My only moans now are I only get standard notifications on the 2 CVR cameras. I no longer get 30 days of motion detection video snippets, they have in effect been replaced with 15 days of CVR.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

Netvuk — Thu, 31 Oct 2019 13:26:48 GMT

No -I take it all back Arlo CVR is crap. I have cancelled the subscription and hon back to smart notifications.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

mathschool — Tue, 19 Nov 2019 09:35:44 GMT

So we have 4 Arlo Q+ cameras in 4 different places (1 camera per router), and we have exactly the same issue with all cameras. If there is a black gap in CVR, all the remaining recording for that day is unavailable because if you try to play video after gap, screen remains black and keeps loading forever. Which means camera becomes absolutely useless.

This is surely a problem with camera itself because the same happens with different browsers and Arlo app.

We kindly request Arlo representative to update this topic with more details because the issue was reported more 6 months ago, many other users confirmed they have the same issue, and yet Arlo absolutely ignores this problem for months.

Re: Frequent gaps when recording video with CVR on Arlo Pro 2. See pictures on post.

JessicaP — Tue, 19 Nov 2019 16:20:59 GMT

If you're experiencing problems where you're getting frequent gaps from your CVR recordings, please contact the Support Team to further investigate this issue. You will find several options for contacting support in the provided link.