topic Re: Arlo pro 2 wired problems in Arlo Pro 2

Arlo pro 2 wired problems

Greenlit — Mon, 29 Apr 2019 08:16:13 GMT

Whenever I have my arlo pro 2 wired it seems to freeze in live view on my app on my Samsung note 9. Is this a common issue? I tried both the arlo cable and a third party with the same issues

I checked all firmware and my app is up to date.

When I unplug the ac adapter the live view works flawlessly.

Re: Arlo pro 2 wired problems

Dannybear — Mon, 29 Apr 2019 09:04:28 GMT

Have you placed the powered camera closer to the base station to eliminate wifi interference?
Have you removed the camera battery and externally powered to see if this stops the issue?

Re: Arlo pro 2 wired problems

Greenlit — Mon, 29 Apr 2019 21:23:06 GMT

Thanks for the response Danny

The cameras are all fairly close to the base , I have just tried moving closer but the same problem persists.

I did not know I could run the cameras without a battery and with a straight wired connection. I will try that today.

Re: Arlo pro 2 wired problems

Greenlit — Thu, 02 May 2019 01:48:54 GMT

Yup just tried taking out the battery and it still freezes up

Re: Arlo pro 2 wired problems

Dannybear — Thu, 02 May 2019 02:03:56 GMT

If you have previously applied pinch and zoom to the camera then reset it via the web browser under the camera’s video settings thumbnail. Do this anyway to be sure.
Do this to all cameras on the base.

If you have basic activity zones applied to any cameras, delete them also. Check that they don’t return by themselves within 48hrs.
Check your rules, modes and schedule settings for corruption after deleting the activity zones.

Then see if the issue stays resolved after 48hrs.