topic Re: Arlo Pro Night Vision constant motion activation and no night vision in Arlo Pro

Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Mon, 23 Jan 2017 15:41:19 GMT

New User, just picked up the Arlo Pro 4 camera kit with base station on Friday and installed Saturday morning.

2 Quick Questions...

1. One camera on the side of my home at night is CONSTANTLY activated every other minute for motion and starts recording. There isn't any motion to activate it. Any tips? (I noticed there is two locations to modify motion sensitivity, but I'm unsure which one to adjust if not both if that is your suggestion). One is located under the cameras setting icon when looking at devices, the other is under the mode settings when looking at the armed mode.

2. Other side of the house, I have placed really high and far back down my driveway. (Maybe 70' from street, and 18' up in the air). When night vision is on or live view during the night, All i see is BLACK except for the siding of my home. Is the night vision not working properly? Or do I need to drop the camera a little bit closer to the ground? Any other tips are appreciated.

See Photos Below

Re: Arlo Pro Night Vision constant motion activation and no night vision

ysu — Mon, 23 Jan 2017 18:54:04 GMT

Same here. Bought pro 4 camera set from bestbuy yesterday and all worked well except this problem.

At night when night vision is on, doing a live view or a legit motion seem to trigger false alarm at least 5-10 minutes afterwards. It eventually settles but annoying. Some suggested hardware issue but I haven't had a chance to swap and verify.

Lots if similar reports in forum already. Hope to see a firmware update to solve that. Really nice system except this issue.

To add: I'm facing camera towards my house from backyard fence. So at night the wall looks quite bright in night vision. Not sure if that's causing some IR reflection or something. I will also adjust angle to see if it happens again.

Re: Arlo Pro Night Vision constant motion activation and no night vision

TomMac — Mon, 23 Jan 2017 19:16:29 GMT

(Maybe 70' from street, and 18' up in the air). When night vision is on or live view during the night, All i see is BLACK except for the siding of my home.

These are BATTERY powered IR illuminators... thay have a usable range of 20 ft +/- ( with inverse sq law as to lighting )... so you not going to see much out to 70ft away

You can;

1) use regular flood lights as the Pro work fairly well in low light levels,

2) use external IR floods if you want to stay covert

3) cover less area.

Re: Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Tue, 24 Jan 2017 10:54:26 GMT

I have the geek squad added, and I'm an elite member at Best Buy, so I have 30 days to return. But, I'd like to just swap the one camera not the entire kit. That is, if its a camera issue..... I opened a support ticket on Arlo, going to call today both best buy and Arlo.

Re: Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Tue, 24 Jan 2017 10:56:09 GMT

Maybe I was just hoping for more for the pricetag from these.

Re: Arlo Pro Night Vision constant motion activation and no night vision

JamesC — Tue, 31 Jan 2017 22:50:07 GMT

For those experiencing this issue. Can you confirm you still see the same behavior when audio is disabled for the camera?

Consider disabling or reducing audio sensitivity and test to see if you get the same results:

How do I change the audio sensitivity on my Arlo camera?

Log in to your Arlo account and navigate to Settings > My Devices > select the desired camera > Audio Settings > toggle off speaker and microphone

JamesC

Re: Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Wed, 01 Feb 2017 12:02:05 GMT

I didn't test the microphone off function. But I did take the cameras back to Best Buy. The two I had trouble with were replaced with no questions. Haven't had the issue since. The only Issue I'm having now is one of the cameras gets really shotty night vision.

Re: Arlo Pro Night Vision constant motion activation and no night vision

manofice — Wed, 01 Feb 2017 13:53:16 GMT

JamesC, when I had this issue, audio detection wasn't even on. Lowering senstivity also didn't seem to make a difference.

Re: Arlo Pro Night Vision constant motion activation and no night vision

JamesC — Fri, 10 Feb 2017 17:33:31 GMT

The engineering team is currently investigating this issue. I will post an update with more information as soon as I can. We appreciate your patience in this process.

JamesC

Re: Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Fri, 10 Feb 2017 23:56:39 GMT

FYI- After 17 days and the issue being escalated to a LVL 2 rep at Netgear Arlo Support. Arlo has offered to replace one of the cameras at my shipping expense. I THINK NOT!!!!!!!!!!!!!!!!!!!!!!!!
I have this LVL 2 Tech checking with his boss as to what they are going to do. Because there is no way that I will be paying for return shipping of an item. I can return it on my own Leoni Expert ID 8319 was rude and told me they needed my credit card information. I will not provide that info for something that was not my fault!

I will return the entire kit. HORRIBLE CUSTOMER SERVICE!

For Netgear Management, that is horrible customer service and I had to speak up about that.

Re: Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Sat, 11 Feb 2017 00:21:40 GMT

To top it off, Leoni hung up on me when reqesting to speak to his manager.

This is the customer service you will receive from ARLO Netgear LVL 2 reps.

Horrible horrible service. I'm disgusted at this point. The cameras could show me the way to the end of the rainbow's pot of gold and I wouldn't care at this point.

Re: Arlo Pro Night Vision constant motion activation and no night vision

JamesC — Mon, 13 Feb 2017 23:07:25 GMT

cturboaddict,

I apologize for the poor experience. I will reach out to you in a private message to offer further assistance.

JamesC

Re: Arlo Pro Night Vision constant motion activation and no night vision

Ghenley — Sun, 26 Feb 2017 13:41:29 GMT

I am having the same issue with Arlo Pro camera detecting motion almost constantly in night vision. Camera works great in day mode though. Is there a fix for this yet?

Re: Arlo Pro Night Vision constant motion activation and no night vision

Tadabee128 — Tue, 28 Feb 2017 15:07:41 GMT

Having same issue, already replaced one camera at my own expense and still the same issue. I'm willing to try another camera but not at my own expense! Paid $16 the first time. This issue is really starting to be a deal breaker.

Re: Arlo Pro Night Vision constant motion activation and no night vision

JamesC — Tue, 28 Feb 2017 16:33:00 GMT

The engineering team is currently investigating this issue. We will provide an update as soon as a solution is confirmed.

We appreciate your patience in this process.

JamesC

Re: Arlo Pro Night Vision constant motion activation and no night vision

cturboaddict — Wed, 01 Mar 2017 12:05:49 GMT

I know it's no help of now. But I highly suggest purchasing from Best Buy vs anywhere else for the Arlo kits. I paid a little extra for the geek squad and Best Buy's customer service is bar none in comparison to the horrid that is NetGear's Tech Management team..

With that being said, this forum and James are top notch. Just good luck with customer service at Netgear.

Re: Arlo Pro Night Vision constant motion activation and no night vision

Tadabee128 — Sun, 19 Mar 2017 05:34:54 GMT

Any update to this? It's still driving my family nuts.

Re: Arlo Pro Night Vision constant motion activation and no night vision

GRV — Sun, 19 Mar 2017 06:20:22 GMT

How far is the camera from the base station? May it 10 ft.
Put video to default setting don't zoom it.

Re: Arlo Pro Night Vision constant motion activation and no night vision

GRV — Sun, 19 Mar 2017 07:38:30 GMT

Make it 10 ft.

Re: Arlo Pro Night Vision constant motion activation and no night vision

Tadabee128 — Sun, 19 Mar 2017 16:03:33 GMT

My closest camera is the one giving me the problems. Only at night. About 30' away